well I went out to the races today...Man my 60 ft times sucked....My ride is DA integra with a b18c1 w/usdm itr pistons, itr head, ihe,(haven't dyno'd yet) b16 trans on bfg g-force sport tires about 35% tread left.....Well I really need to work on my 60 ft times any feedback would be great...this was my best 60ft time resulting a 15.2..I hit a 15.3 w/2.5 60ft @94.5mph..So I know my can get into the 14's with some better driving skills..May be some better rubber...or a combination of both...

quickest time slip out of 3 runs today
r/t... .095
60'... 2.478
330... 6.613
1/8... 9.956
mph... 73.70
1000... 12.812
1/4... 15.221
mph... 93.35

 

who was there dude from local street racers sport compac ?????????

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by i-vtec2003 &raquo;</TD></TR><TR><TD CLASS="quote">who was there dude from local street racers sport compac ?????????</TD></TR></TABLE>
No professional racers where there..It was just an amateur event..So there wasn't any big name companies there...

 

when is the next street legal date.

 

I think if you don't launch at too high of a rpm it might help on the 60 ft.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by IT’S ME DAVID &raquo;</TD></TR><TR><TD CLASS="quote">when is the next street legal date.</TD></TR></TABLE>
june 30th

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HONDA RR &raquo;</TD></TR><TR><TD CLASS="quote">I think if you don't launch at too high of a rpm it might help on the 60 ft. </TD></TR></TABLE>
I launch at about 2500 rpm's...with some wheel spin...any more than that and I'll spin really bad...any lower and it will bog....I'm going to get some azenis r-615 and dyno-tune my ride with some cam gears before the next event...I'm hoping to get my ride into the mid to low 14's...

 

get some practice, some better tires, drop the air pressure in them and id say u should see 13s