Any other apart from the JDM DC2 R steering wheel that fits? S2000, USDM DC5 Type-S, JDM DC5 R, JDM EP3 R? Any pics of it installed?

 

Anybody?

 

Wish I could help ... All I know is that if the RSX Type-S wheel would fit my R, I'd walk out to my driveway, rip the wheel off the S, and put it on the R.

 

I'm pretty sure the S2000 does not fit unless you change your steering rack with a Ek.

Ali

 

I'm pretty sure the only other wheel that is compatable are eg wheels. And it's with any DC, not just an ITR

 

UK MB series Civic's fit too


not that they're nice to look at


my old civic had a wheel virtually identical to the US ITR, but had a big 'H' stamped on the airbag instead of an 'A'

 

EK steering wheels won't fit. HTH

 

So its either a JDM DC2 R one or aftermarket one..... Man the Type S one would look sooo nice.

 

There's a wheel that you don't see very much. It's the Honda Access wheel that was an options choice in markets where SRS was not mandated.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by George Knighton &raquo;</TD></TR><TR><TD CLASS="quote">It's the Honda Access wheel that was an options choice in markets where SRS was not mandated.</TD></TR></TABLE>

I just don't feel safe removing a safety feature that is meant to save your life. But then again, my car isn't a dedicated track car with a roll cage and a 5 point harness. If I replace my steering wheel, its going to be the JDM 98 Spec SRS steering wheel.

 

That's as it should be.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by iheartintegras &raquo;</TD></TR><TR><TD CLASS="quote">I'm pretty sure the only other wheel that is compatable are eg wheels. And it's with any DC, not just an ITR</TD></TR></TABLE>



<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by neo_ &raquo;</TD></TR><TR><TD CLASS="quote">

I just don't feel safe removing a safety feature that is meant to save your life. But then again, my car isn't a dedicated track car with a roll cage and a 5 point harness. If I replace my steering wheel, its going to be the JDM 98 Spec SRS steering wheel. </TD></TR></TABLE>



<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by George Knighton &raquo;</TD></TR><TR><TD CLASS="quote">That's as it should be. </TD></TR></TABLE>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by walker111 &raquo;</TD></TR><TR><TD CLASS="quote">
</TD></TR></TABLE>
It's not for everybody. The only time my car's on the street is when it's driving to the track or driving to some shop somewhere.

I got progressively stringent recommendations from NASA safety officials who at one point recommended removing the SRS.

The interior looks far, far worse now, what with the cage and cable K shifter.



But I still like that steering wheel.

 

so s2000 wont fit on intergra

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by COME UP`S &raquo;</TD></TR><TR><TD CLASS="quote">so s2000 wont fit on intergra </TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PrinceAli132 &raquo;</TD></TR><TR><TD CLASS="quote">I'm pretty sure the S2000 does not fit unless you change your steering rack with a Ek.

Ali</TD></TR></TABLE>