what do you guys think about the golden eagle sleeves are they that good

 

yes

/thread

 

yeah i heard they were

 

No they're absolutely terrible. Worst sleeves ever made. I don't know why 75% of engine builders would use them.

/thread

 

which brand do you recommend i am planning on running 30-35 lbs of boost

 

did you ever think to run a search? i did, and look what i found...

» Search Results

Your search for sleeves returned 976 results.

 

» Search Results

Your search for build returned 806 results.


word.

 

what do you use

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ruben19 &raquo;</TD></TR><TR><TD CLASS="quote">what do you use</TD></TR></TABLE>

Next time Aim that question at someone.

If you're asking me, I don't have a motor worth building yet. I'll let you know when I do.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ruben19 &raquo;</TD></TR><TR><TD CLASS="quote">what do you use</TD></TR></TABLE>

Hands down benson sleeves are the way to go. GE are good but there machining im not to fond of.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Luserkid &raquo;</TD></TR><TR><TD CLASS="quote">Hands down benson sleeves are the way to go. GE are good but there machining im not to fond of. </TD></TR></TABLE>

i guess 30+ years machining experience and a lifetime warranty is not enough for you.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Golden Eagle &raquo;</TD></TR><TR><TD CLASS="quote">

i guess 30+ years machining experience and a lifetime warranty is not enough for you. </TD></TR></TABLE>

Oh wow are you a representative for them?I guess so.

What makes them so much better than other?I see many builders using them yet i have no experience.Give us some facts

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Felliph3 &raquo;</TD></TR><TR><TD CLASS="quote">

Oh wow are you a representative for them?I guess so.

What makes them so much better than other?I see many builders using them yet i have no experience.Give us some facts</TD></TR></TABLE>

lol... who are you ?.... nobody, as for golden eagle.. i would trust them with my block ANY day of the week.

it's a track record... golden eagle has been in this longer than a lot of us..


Modified by GarageAlchemist at 11:48 AM 4/10/2007

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Felliph3 &raquo;</TD></TR><TR><TD CLASS="quote">Oh wow are you a representative for them?I guess so.

What makes them so much better than other?I see many builders using them yet i have no experience.Give us some facts</TD></TR></TABLE>

yes i am the golden eagle rep and i never said there better than any other sleeve all i said was 30 + years experience and lifetime warranty

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GarageAlchemist &raquo;</TD></TR><TR><TD CLASS="quote">lol... who are you ?.... nobody, as for golden eagle.. i would trust them with my block ANY day of the week.

it's a track record... golden eagle has been in this longer than a lot of us..


Modified by GarageAlchemist at 11:48 AM 4/10/2007</TD></TR></TABLE>

thanks for the support

 

golden eagle FTW

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Golden Eagle &raquo;</TD></TR><TR><TD CLASS="quote">

i guess 30+ years machining experience and a lifetime warranty is not enough for you. </TD></TR></TABLE>

Not to sound like an *** but Benson gives lifetime warranty as well.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Luserkid &raquo;</TD></TR><TR><TD CLASS="quote">Not to sound like an *** but Benson gives lifetime warranty as well. </TD></TR></TABLE>
that's fine but i didn't come on here knocking benson, i have no problem with his sleeves, i have said this before benson is a great machinist, you came on here knocking our machine work when you don't know anything about it and you might want to talk to benson who also has no problem with our machine work, before you go putting his name out there like that

Modified by Golden Eagle at 3:18 PM 4/10/2007


Modified by Golden Eagle at 3:19 PM 4/10/2007

 

PM'd you.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Luserkid &raquo;</TD></TR><TR><TD CLASS="quote">PM'd you. </TD></TR></TABLE>

thanks replied to you

 

I have dealt with GE myself on multiple occasions and have recommended them to many friends.

Never have and probably never will have a problem with them either.


In all honesty, you won't have a problem with pretty much any major manufacturer of parts like that so then it dips to customer service. I have never worked with another company who would DRIVE a headgasket to the UPS place for me so I could get it the next day when I needed it so GE will always get the thumbs up from me.

 

not to be off the sleeving subject but the ls-vtec conversion kit is awesome also, and I, like the other guy, had great customer service...I WOULD SERIOUSLY CONSIDER GOLDEN EAGLE QUALITY PRODUCT AND QUALITY CUSTOMER SERVICE...