Greetings one and all. I'm looking for some basic info. and hoping someone can point me in the right direction. I'm doing some brake work (replacing the cylinders) on my Honda Accord. In specific, the rear drum brakes. Strangely enough my Haynes manual doesn't give/show the minimum thickness that the brake pads/shoes can be before needing replacement. They look pretty good and I don't want to waste time or money if they don't need to be replaced. I think they were just done within the last 2 years.
Anyway...if anyone has those specs or can point me to a thread or site that has this info. I'd greatly appreciate it.

If needed here's some specifics on year/model of my car:91' Honda Accord, Wagon, EX, engine-F22A6, chassis-CB9.


Any help would be greatly appreciated. Thank You

Olias


Modified by Olias at 6:14 PM 3/31/2007


Modified by Olias at 8:39 AM 4/1/2007


Modified by Olias at 8:41 AM 4/1/2007

 

Think I found it. It appears that 3/16" is the minimum thickness in case anyone else needs to know.

Olias