Can I buy a brand new ITR intake arm from Acura? The part number is not present at this Acura OEM parts website: http://www.acuraoemparts.com/d...ch=no

Only the GSR intake arm has a part number. The U-tube under the arm has a part no assigned, but its not stated in the list.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by garyc17 &raquo;</TD></TR><TR><TD CLASS="quote">Can I buy a brand new ITR intake arm from Acura? The part number is not present at this Acura OEM parts website: http://www.acuraoemparts.com/d...ch=no

Only the GSR intake arm has a part number. The U-tube under the arm has a part no assigned, but its not stated in the list.</TD></TR></TABLE>

Yes but the actual part number listed below says P73 in it, so you know this is an ITR specific part (P72 is GSR). If you look carefully, the ITR intake arm isn't even drawn on that page at all. The lower one pictured with the U-tube is actually the B18B intake, and upper intake arm is for the GSR. Those extra tubes aren't present on the ITR as they are for noise reduction which isn't a concern on the ITR...

 

Part # *should* be 17228-P73-000, but I'd confirm that with an Acura parts dept.

I also have a used ITR intake arm I'd sell for much less than new.

 

My gsr didn't have those tubes

I also have that arm for sale. $20 takes it

 

I got mine from Baranco, but it would be better to take one of these guys up with their offer of a used one. Much cheaper!

 

Okay thanks dudes for all the advise. I'm gonna keep this on hold for now.

 

What is the length of the complete ITR intake arm from end to end? Can any of you guys selling it give me the measurement?

 

Bump.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by garyc17 &raquo;</TD></TR><TR><TD CLASS="quote">Bump.</TD></TR></TABLE>
Man, I don't want to be mean but I have received three reports from OG who know that you are not supposed to be bumping queries.

Wait for somebody to reply to your query. If you keep bumping, the old guys are gong to slay you.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mugen Mike &raquo;</TD></TR><TR><TD CLASS="quote">I also have a used ITR intake arm I'd sell for much less than new.</TD></TR></TABLE>

Just buy mike's. If you dont want to buy one from a guy in wisconsin (i dont blame you ) there are probably a lot of others on this forum who have one to sell ...

chris - who slays the original poster for his bump.... with... his slaying equipment.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mugen Mike &raquo;</TD></TR><TR><TD CLASS="quote">
I also have a used ITR intake arm I'd sell for much less than new.</TD></TR></TABLE>

Already sold

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RStoR &raquo;</TD></TR><TR><TD CLASS="quote">

Already sold </TD></TR></TABLE>

yup

 

Sorry guys for the bumps. I'll just wait patiently for a kind dude to help out.

 

Is there a reason you're posting in BOTH threads you created about the stock intake arm?