i have a little problem. i have a 96 integra and im doing the auto to manual and i wanted to know is there wiring involved on interlock switch white box where the clutch pedal goes cause im following the instruction that had printed out from honda tech and the guy shows the wiring for the shifter. u connect the two starter wire and green/white that is the key removal and i connected them togehter but the key wouldnt come out and i did leave the car in park.but when disconnected the interlock it came off but im pretty sure theres something that i have to wire. please i need to know any tricks or tips about to put motor and tranny in.in the auto to manual page he didnt talk about the interlock.

 

i just want wiring advise. got everything else

 

when i changed over mines there was the two thick black and white wires that went to the shifter that i connected so that the car will start and as far as the key thing mines did that to once i put it in i couldnt get it back out until i took this black plug off the ignition then it came right out , this was a long time ago so sorry that i dont remember everything to detail

 

does any body have the wire setup

 

bump