Like the title says I have an F1spec Tri Y header, brand new. Header fits Bseries.

Let me know if your interested. 450 shipped.

Open for trades as well











Modified by YouvGotMail at 4:32 PM 3/27/2007

 

arent these 200 on ebay?

 

Yea dude these are the ones on ebay for 200. you have to redrill the holes to actually make them fit. and a possible reporting of the header flange to make it line up correctly. And you have to have a test pipe because it does not allow you to run the stock sized cat. unless you cut your existing exhaust piping to fit a cat.

As you can see they are the f1spec junk headers which they were trying to replicate hytech version.

on trying to sell these for double the value and the poor quality fitment.

 

First of all your a stupid son of a bitch for even opening your mouth about this header because you have not even seen one in person. I have 2 of them, and the ports are perfect, and only 2 holes have to be drilled a little bigger on the flange. Everything else is perfect on the header, and it is exactly like a Hytech, because it came from the same factory, jackass.


for opening your big fat mouth


edit: btw, I did get it for 200, but where else are you gonna get a hytech/rage/camp1320/mf/whoisdan/omni/spooling performance/f1spec header for under 650 new minus shipping??? Supply and demand......someone will eventually buy it because it is worth the price...... you cant get it on ebay anymore anyway

 

so 450 and the holes havent been redone. Ill just buy one already done.

 

for trying to rip people off

 

I guess I'm a jackass for opening my mouth about these headers. and telling them about how much they are worth. There was a reason why they were sold for 200 shipped on ebay...

Don't get all pissy and bitchy because I put facts on the table jackass

 

You can buy rage replicas that fit way better and make more power for 550 maybe even less shipped to your door. Redrilling the flange? WTF? Are you serious? Take your ebay special back to Illinois or whereever the expletive you are from. Arent you supposed to be in the area/region to post here anyways?

This post needs to get removed. This guy is a tool. We dont need your overpriced Hytech copy piece of ****. I'd rather buy a tsudo header

I wonder why he is posting in other regions? maybe becuase no one in his area wanted to get ripped off? You are the next best thing to a scammer. . . straight jacking dumb people straight up Let me guess get we pay for shipping too? Lol




Modified by R_Status at 7:54 PM 3/26/2007

 

That's a ******* markup of 250% of what you paid.
GTFO w/ your F1 spec reject.

 

All of you can suck my ****** ****. Your all hating because yall cant flip a header like me and make 250 profit, I aint tryin to lie to anyone, I never denied I bought it for 200. This came from the same factory that the real Hytechs came from anyway, so shut the expletive up.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by R_Status &raquo;</TD></TR><TR><TD CLASS="quote">\ Redrilling the flange? WTF? Are you serious?


We dont need your overpriced Hytech copy piece of ****. I'd rather buy a tsudo header

I wonder why he is posting in other regions?


Let me guess get we pay for shipping too? Lol
Modified by R_Status at 7:54 PM 3/26/2007</TD></TR></TABLE>


1. Well to the first part, YES redrill the flange, are you a dumbshit for making such a minor thing a big deal, when in reality it effects nothing if you do it correct and everything else lines up anyway. Nothing wrong with the ports either.

2. You a stupid piece of **** for saying youll buy a tsudo header over this. That has to be literally the stupidest thing ive ever heard. Go ahead and buy your header that loses hp, ill run my replica and put down some real numbers. There is a guy thats gonna dyno it anyway, so ill post that **** in my for sale and none of you are gonna say ****.

3. I am posting the header in many places for your information, so no its not to scam anyone, I have it listed in my area. Also I offer people to pick it up if they want.

4. Wanna bitch about the shipping?? Fine 450 shipped, you got it. Have some fun with it.

 

BLAH BLAH BLAH.

Thats All I saw. Big deal you cant buy this "super dyno power F1spec Header" on ebay anymore. Maybe they got sued for making such a poor replica of a real TRI-Y Header. Maybe they didnt sell and thats why they aren't on EBAY anymore. Ever think of that? Maybe you got a good deal and bought all the leftover ones when F1spec went bankrupt and sold their kmart quality header for business closing costs. Anyways read the sticky smart guy.

http://www.hondamarketplace.com/zerothread/1845437

A note about regional forums: The point is for people local to each other to be able to sell to each other. As time goes on, more and more people outside a region appear to be targeting individuals in specific regions, and some of the targeting individuals appear to be commercial.

<U>From now on, when an out-of-region post is discovered, the lock or removal will involve deducted points (or other sanctions in ongoing or extreme cases).</U>

You can cross post an advertisement. It's OK to have it in your Hondamarketplace.com regional forum and in the relevant Honda-Tech forum at the same time.

For a list of classifieds rules, visit https://honda-tech.com/zero...10#14 and scroll down to the rules written by Mike M. Except for the exceptions noted above, which apply specifically to the regional forums, his rules should be followed.

Thanks very much for your help.

We dont want to get ripped off here in the pnw buddy. Take your tsudo wanna be header and sell it to some poor kid in chi-town

GTFO

 

Anthony La letting people know about some 2nd rate, didn't pass inspection, couldn't even cut it as a "production" header for HyTech, over priced, peice of ebay ****, while quoting the honda-tech rule book.

this kinda **** goes good with coffee.

 

Yeah I get bored sometimes. Hows the R chuck?

 

Go suck each other **** you both of ****** bitches


Its simple, neither of you have seen the header, and its ******** like you two who spread rumors about this header. Facts: Made in same factory as Hytech, ONLY flaw are 2 flange holes which is why it didnt pass inspection, which is irrelevant anyway because the ports are perfect.


Oh and im sorry to break your widdle heart but this is much better than a Tsudo header, and another thing.... My opinion of why F1spec sold them so cheap was because when they were selling them themselves, people bitched about the flange, and they got fed up and said f*ck it an d sold em hella cheap..

All of you are just pissed you didnt get this ****** awsome deal. Its funny cause the only people complaining are the ones who dont have it, yet theres a 19 page thread on in header, and people are happy when they recieve it. People just bitched about the long shipping time(because f1spec didnt make **** on the header)


Modified by YouvGotMail at 4:33 PM 3/27/2007

 

a little homophobic are we? Show me a dyno sheet of this awesome power this crazy 200.00 dollar header makes. I want to see.

man i am soo pissed i didnt get that deal on that junk header. Man damn Lmao

 

cant wait for the dyno myself

 

man didnt mean to start a ******* riot.. I knew about this header for a while, and i never said anything bad about. Please show me where it says that hytech produced this header, then sold it to another company and let them rebadge it with thier own name on it and sell it? I have read the thread on this header and no where does it say that hytech designed and produced this header. Please dont spread false information.

 

This is hytechs design, wtf are you talking about??

hytech/rage/camp1320/mf/whoisdan/omni/spooling performance/f1spec are all the same headers, so you stop spreading false information. You are all coming up with your own theories just to hate because its honda-tech. You will all be really pissed once the numbers come.

 

Wait wait wait .....

You paid $200 for this brand new .... and you can buy them elsewhere for $200 brand new .....

But you want $450?

Logic?

 

Haha

"your all hating because yall cant flip a header like me and make 250 profit"

your not a hustler get out of the NW forum

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gsrhb7 &raquo;</TD></TR><TR><TD CLASS="quote">Haha

"your all hating because yall cant flip a header like me and make 250 profit"

your not a hustler get out of the NW forum</TD></TR></TABLE>

Oooh ... he is out of region .... Granddad is gonna whoop his ***.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by YouvGotMail &raquo;</TD></TR><TR><TD CLASS="quote">This came from the same factory that the real Hytechs came from anyway, so shut the expletive up..</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by YouvGotMail &raquo;</TD></TR><TR><TD CLASS="quote">
This is hytechs design, wtf are you talking about??

hytech/rage/camp1320/mf/whoisdan/omni/spooling performance/f1spec are all the same headers, so you stop spreading false information. You are all coming up with your own theories just to hate because its honda-tech. You will all be really pissed once the numbers come. </TD></TR></TABLE>

Your retarded. Hytech did not produce this header. R1 copied there design, something went wrong with flange, did not pass inspection then sold them on ebay. So basically what you have in your possesion is a rejected variant of a "hytech" design header. Not a ******* Hytech header.

 

haha owned

 

You and your parts must be in the region in which you are advertising.