Here is the deal I took this B16 engine apart w while back and didn't realized how the caps should be poistion as far as location goes. I have the explode view but that don't help at all. I notice there are numbers stap on the caps, also I notice that there are arrows on there as well. I know that the arrows indicates how to face them but not where they go. the stamp on the caps are: 4-1, 2-2, and 3. someone please help me out. if possible I would like a picture of ylinder head with the caps on but the oil feed rails off. help please

 

the arrows should point to the timing belt. Dont pay attention to the small number on the caps. For example. 4-1 (big 4 small 1). this just means it's the forth one from the belt. 2-2 is the second one from the belt. 3 should be the middle and the other two, 5 and 1, should go on the sides. I hope this helps. goodluck with your build.

 

yeah, I tried to install them that way and the bore seemed to line up pretty well, thanks alot.