I know you guys like project with pics... Check mine
Hey guys, im new to prelude's, ive owned 2 civics. found a good deal on this with nice low miles and a clean title. nearly rust free except the panels that were crashed. My plans for it are to make it look as close to "new" with my budget.
Im not doing and mods to it and I have replaced a few interior peices like shift boot and shifter from Honda. Otherwise mechanical and interior is as near mint as it comes!!
This Is the poor thing as I got It. Bumper ripped off, door caved in quater panal damage, and hood bent from an improper locking incident. As you can see the trailing arm and spindle in the rear also bent.

Here is another one, diff. angle

This is Curtis blocking out my right side of the car to rid it of its door dings. Had about 15 or 20 around the whole car.

The new quarter was sectioned in sorta a bad spot. We did this to avoid removing the rear windsheild. This is Neema cleaning up the welds.

Here is the car all mudded up using the gold 3M premium filler. Again this is where the skills were need to make this straight and clean.

Here the rear quater was primed up using 2 part etch and sealer primer. Also the Drivers outer door skin was replaced because the previous owner filler the door with body filler (in a really bad way) and looked like crap. You can see this in that other pic.

Here is the right side of the car, pic looks poor but its minimal orange peel and the main this is no dings or signs of body work. Thank you Curtis, your the man.

This is the Left side, nice n clean. Very straight. Still missing Rim, and rocker moulding. Should be here any day.

All this work has been going on for three weeks. Ive invested $1500 all oem honda metal and parts.
I just got the new hood so it must be painted and installed as well as the rear bumper. Rocker molding and tire. (tires got a hole)
Now all I got to do is Color sand the car to smooth everything as I dont have a paint booth to use anymore.
I will post more pics when its finished.
Friday Paint the hood, bumper and spoiler. Sunday color sand & Buff!!!!
Thanks Guys!
Im not doing and mods to it and I have replaced a few interior peices like shift boot and shifter from Honda. Otherwise mechanical and interior is as near mint as it comes!!
This Is the poor thing as I got It. Bumper ripped off, door caved in quater panal damage, and hood bent from an improper locking incident. As you can see the trailing arm and spindle in the rear also bent.


Here is another one, diff. angle

This is Curtis blocking out my right side of the car to rid it of its door dings. Had about 15 or 20 around the whole car.

The new quarter was sectioned in sorta a bad spot. We did this to avoid removing the rear windsheild. This is Neema cleaning up the welds.

Here is the car all mudded up using the gold 3M premium filler. Again this is where the skills were need to make this straight and clean.

Here the rear quater was primed up using 2 part etch and sealer primer. Also the Drivers outer door skin was replaced because the previous owner filler the door with body filler (in a really bad way) and looked like crap. You can see this in that other pic.

Here is the right side of the car, pic looks poor but its minimal orange peel and the main this is no dings or signs of body work. Thank you Curtis, your the man.

This is the Left side, nice n clean. Very straight. Still missing Rim, and rocker moulding. Should be here any day.

All this work has been going on for three weeks. Ive invested $1500 all oem honda metal and parts.
I just got the new hood so it must be painted and installed as well as the rear bumper. Rocker molding and tire. (tires got a hole)
Now all I got to do is Color sand the car to smooth everything as I dont have a paint booth to use anymore.
I will post more pics when its finished.
Friday Paint the hood, bumper and spoiler. Sunday color sand & Buff!!!!

Thanks Guys!
Very nice work
It's always nice to be able to do body work on your own... it saves you a LOT of $$$. If you don't mind me asking, what did you give for the car, year, and mileage?
It's always nice to be able to do body work on your own... it saves you a LOT of $$$. If you don't mind me asking, what did you give for the car, year, and mileage?
Yeah thanks!! ive been doing body and paint for a while.
I paid $1500 for the car with tax and title in my name. Im in about $1500 parts and paint. (base clear) so... im in about $3000 all said and done, maybe $3300.
The car is a 1997 with 130,00KMS
about 81,000 miles.
Thank you!!
I paid $1500 for the car with tax and title in my name. Im in about $1500 parts and paint. (base clear) so... im in about $3000 all said and done, maybe $3300.
The car is a 1997 with 130,00KMS
about 81,000 miles.
Thank you!!
Trending Topics
wow, sick job bro. wanna do mine next? i just have a few rust spots i want cut out n some dents n dings taken care of lol
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by s_vares »</TD></TR><TR><TD CLASS="quote">Okay guys, project is done and on the road. I think it came out okay, but im still missing the back lip (in transit)
what do you think??


</TD></TR></TABLE>
Looks sick without the other emblems. Nice job.
what do you think??


</TD></TR></TABLE>
Looks sick without the other emblems. Nice job.
Lol, thanks alot guys, I love the car. I just got it tinted 20% around today looks clean, and im gonna drop it a we bit but thats it I wouldnt rice it out. This is what it cost me.
Car $1500
Body panels $700
Bumper, Rocker molding, Tail light $300
Paint $350 (base clear)
Body supply and buffing $450
Tires $200
Suspension $250
Other $300
----------------------------------------
Total $4050.00
Little more than I thought, but it looks good once again. Thanks for all your compliments
Car $1500
Body panels $700
Bumper, Rocker molding, Tail light $300
Paint $350 (base clear)
Body supply and buffing $450
Tires $200
Suspension $250
Other $300
----------------------------------------
Total $4050.00
Little more than I thought, but it looks good once again. Thanks for all your compliments

so like i said...<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rawNAprelude »</TD></TR><TR><TD CLASS="quote">wow, sick job bro. wanna do mine next? i just have a few rust spots i want cut out n some dents n dings taken care of lol</TD></TR></TABLE>haha






?