Few new goodies :)
lol
Thread Starter
Junior Member
Joined: Feb 2004
Posts: 701
Likes: 1
From: Spokane, WA, US
Re: Few new goodies :) (crxgator)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by crxgator »</TD></TR><TR><TD CLASS="quote">you should probably turn your test pipe over...</TD></TR></TABLE>
I tried but 02 sensor wont allow it
Unless there is another way or trick to doing so, because ya it sucks like this I have to avoid all bumps and go into parking lot @ crazy angle like I have ricer body kit on my car..
I tried but 02 sensor wont allow it
Unless there is another way or trick to doing so, because ya it sucks like this I have to avoid all bumps and go into parking lot @ crazy angle like I have ricer body kit on my car..
Thread Starter
Junior Member
Joined: Feb 2004
Posts: 701
Likes: 1
From: Spokane, WA, US
Re: Few new goodies :) (mtny)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mtny »</TD></TR><TR><TD CLASS="quote">Omg. Get some wire and extend it. </TD></TR></TABLE>
I did that. Thanks though.. I try turning it and it just hits body about 3/4 away around unless I cut 02 sensor about half off it wont work.
I did that. Thanks though.. I try turning it and it just hits body about 3/4 away around unless I cut 02 sensor about half off it wont work.
Trending Topics
Thread Starter
Junior Member
Joined: Feb 2004
Posts: 701
Likes: 1
From: Spokane, WA, US
Re: Few new goodies :) (Doespike)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Doespike »</TD></TR><TR><TD CLASS="quote">Nice pickups! Where did you get a new JDM 4-1?
That is a damn clean engine bay
</TD></TR></TABLE>
Thanks, I got it from hmotors he charged me 349.00 for header lowest you can find anywhere!! Password,inline ect. Wouldnt even match that price for me. Plus it was only 25 to ship and he threw all that other stuff in box because there was plenty of room w/ out charging more on shipping! It only took 3 days too big for Hmotors here!!! http://www.hmotorsonline.com/s...10013
That is a damn clean engine bay
</TD></TR></TABLE>Thanks, I got it from hmotors he charged me 349.00 for header lowest you can find anywhere!! Password,inline ect. Wouldnt even match that price for me. Plus it was only 25 to ship and he threw all that other stuff in box because there was plenty of room w/ out charging more on shipping! It only took 3 days too big
for Hmotors here!!! http://www.hmotorsonline.com/s...10013
Honda-Tech Member
Joined: Jul 2005
Posts: 12,299
Likes: 0
From: selling YOU a Honda or Acura
Re: Few new goodies :) (berettagtz117)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by berettagtz117 »</TD></TR><TR><TD CLASS="quote">
I tried but 02 sensor wont allow it Unless there is another way or trick to doing so, because ya it sucks like this I have to avoid all bumps and go into parking lot @ crazy angle like I have ricer body kit on my car..</TD></TR></TABLE>
I have/had this exact same problem with my Omni pipe too. When I realized it wouldn't work, I took it back off. Now I'm contemplating rewelding a bung in a better location.
How do you plan on making it right?
I tried but 02 sensor wont allow it
Unless there is another way or trick to doing so, because ya it sucks like this I have to avoid all bumps and go into parking lot @ crazy angle like I have ricer body kit on my car..</TD></TR></TABLE>I have/had this exact same problem with my Omni pipe too. When I realized it wouldn't work, I took it back off. Now I'm contemplating rewelding a bung in a better location.
How do you plan on making it right?
Honda-Tech Member
Joined: Sep 2001
Posts: 3,838
Likes: 1
From: San Jose, CA
Re: Few new goodies :) (ITR 00-0477)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ITR 00-0477 »</TD></TR><TR><TD CLASS="quote">
How do you plan on making it right?
</TD></TR></TABLE>
I think he said he's going to drive like a ricer . Nice pickup I have the same header! Looking into the smsp now though...
How do you plan on making it right?
</TD></TR></TABLE>
I think he said he's going to drive like a ricer
. Nice pickup I have the same header! Looking into the smsp now though...
Honda-Tech Member
Joined: Dec 2003
Posts: 2,356
Likes: 1
Re: Few new goodies :) (redGSRguy)
That's really odd, I coulda sworn my Omni test pipe didn't have that problem.
I remember it would still shoot out towards the driver's side, but sure as hell not directly downward.
I remember it would still shoot out towards the driver's side, but sure as hell not directly downward.
Re: Few new goodies :) (00TypeR1071)
yeah i have the omni and it sucks, leaks like hell and yeah that o2 sensor placement is retarded. there is only like 2 inches of space between the hole and the underbody. luckily im on a jdm p73. im buying a smsp with proper o2 location and getting my usdm p73 this week
Thread Starter
Junior Member
Joined: Feb 2004
Posts: 701
Likes: 1
From: Spokane, WA, US
Re: (ITR640)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ITR640 »</TD></TR><TR><TD CLASS="quote">That O2 sensor needs some help.
Would it be worth it to take the test pipe off?</TD></TR></TABLE>
Yea.. If I had JDM cat w/ 2 1/2 collector..I dont like running Testpipe myself but it was a good deal instead of having shop hack up stock cat.
Guess that could still be a option. I just have hard time ruining factory parts for if when I go stock someday..
Would it be worth it to take the test pipe off?</TD></TR></TABLE>
Yea.. If I had JDM cat w/ 2 1/2 collector..I dont like running Testpipe myself but it was a good deal instead of having shop hack up stock cat.
Guess that could still be a option. I just have hard time ruining factory parts for if when I go stock someday..
Thread
Thread Starter
Forum
Replies
Last Post