ok im new to selling on honda-tech but i know a lot about buying and selling etiquette. most of it comes from the saying "treat others as you want to be treated"- i wouldnt want you to sell me something that was bad/broken/incorrect part/whatever without me knowing first. i describe the item as best i can and let you know as much as i know about it, any questions or comments are welcomed.
most of these parts have been sitting around for a couple monthes being stored in my garage or under my patio in the backyard. i can ship these anywhere in the world as long as you pay for shipping or we work out an agreement first- i can ship these usps, ups, fedex or dhl, whatever you prefer and whatever you want to pay for. lowball me on anything as the worst i can say is no. everything is located in san diego, ca near mission valley area. if you pm me on here, please do a post saying so i know to check my pms cuz i dont always check it or email me: hazel_144@yahoo.com
open to trades as well, dont be afraid to offer me whatever or lowball me cuz im always looking
onto the goods:

Tenzo-R Psycho rims
17x7
4x100 + 4x114.3
+42 offset
gunmetal on polished lip
tires: 205/40zr17 visa reinforced (2-30% + 2-85% life)

as seen in pictures, 2 rims have bends in them. 1 of them will not hold air so you will need to take it somewhere or use the others as spares. the bends were caused due to one of the many infamous san diego potholes. looking for $200 or best offer





================================================== ======

Integra Special edition painted rims
15x6.5?
4x100
unknown offset
painted red
195/50/15 kumho ecsta (2-0% + 2-40% life)

as seen in pictures, 2 of the rims have some curbage on them and paint missing around lug holes. there are no bends in any of the rims and they all hold air fine. these things look sick and i would sport them if i didnt already have rota slips on my car and if i wasnt gonna buy some drag equips after i finish my motor. $220 OBO





================================================== ======

Neuspeed Front Lowering springs
88-00 civic + 90-01 integra
lowers approx. 2"
better cornering/handing/launching (stiff)
race series springs
approx. 6 monthes of usage

springs should function flawlessly and dramatically improve blah blah blah, you know how good these things are and they arent some ebay cheapies either. SOLD locally


================================================== ======

RC Racing 370cc injectors
these injectors were used for about 3,000 miles before i threw on my turbo and went to 440cc injectors and theyve just been sitting ever since. the 370's have seen very light use. no clips come with these injectors so you will need to pick them up, you can usually find them pretty cheap tho. i might have an oem gasket/ring set for these lying around that i can include for a little bit more. ill look once i get someone seriously interested. looking for $150 OBO



================================================== ======

NOS nitrous 10lb. bottle with quickflow valve
2 tone paint job (hehe )
could use a repaint but functions fine
not sure when it needs to be hydro'd
comes with quickflow valve attached
$90 OBO





================================================== ======

JDM b16a headstuds
rusted from sitting as seen in pics
all you need is a quick bead blasting/sandblasting or whatnot
i can do the blasting myself but will charge like $10 or so to do it. $20 or lowball me



================================================== ======

OEM p30 b16 intake manifold gasket
never used, just been sitting lowball me




================================================== ======

AEBS triple cam seal
was used for about 3 monthes on a fully built track car and then was given a brand new one from his sponsor when they did the rebuild. all 3 o-rings are fine with no dryrot or anything SOLD to civteck84



================================================== ======

Custom Products (CP) carb eo exempt intake sticker
have 2 of these available. you can either slap these on your intake or my friend used to roll one of these on his turbo kit chargepipe and fool most of these stupid sd cops so they wouldnt hassle him. offer me



================================================== ======

Civic EX stock exhaust manifold (headers)
92-95 or 96-00 ? i remember having this on my 92-95 civic before i upgraded to some custom serious all motor headers and they improved my flow alongside a 2 1/4" exhaust. the bottom pipe says its for a 97 Ex so maybe it fits that as well? slightly rusted from being stored but shouldnt be an issue. no o2 sensor or heatshield is included. make me an offer



================================================== ======

2.5" Dumptube Exhaust piping with dual Magnaflow resonators
my friend had this custom made and was sporting it on his 95 all motor b20/vtec before he went to boost.
this was on a 95 integra so i would assume it will fit on all 94-01 integras and probably 92-95 civics as well but buyer is responsible for fitment. slight rust from sitting but should function flawlessly. one resonator is 22" and the other resonator is 18" and the total length of the exhaust is 68". also, there is no flange to bolt the exhaust to your cat or b pipe so you can either weld it directly or put a flange on there, its up to you. probably want to do local pickup on this as im not sure how much shipping will be, but buyer will be very happy with hp increase while still retaining relatively low noise. $120 or make me an offer






================================================== ======

92-95? or 96-00? Civic SOHC axle
this axle has been sitting for a while, i dont remember what year civic its for so maybe you can tell.
as seen in the pictures, its slightly rusted on the outsides and there is a small tear in one of the boots that doesnt look too bad. maybe use for a core or get a new boot, or just throw it on and run it. make me an offer




================================================== ======

92-95? or 96-00? Civic SOHC axle
this axle has been sitting for a while, i dont remember what year civic its for so maybe you can tell.
this axle looks to be fine, but its slightly different than the other axle as seen in the pics. i think its slightly longer and also looks like it doesnt have as many wrinkles in the cv boots. note that the top axle is NOT included, its just for the bottom axle in the pic. make me an offer



================================================== ======

B16 1.6L crank
used crank out of a b16 motor. i believe it came out of a b16a2 with about 43k because he wanted to use a gsr crank instead. crank looks to be in pretty condition although its been sitting under my patio in a box for about 6 monthes. if you want, i can get a quote for knife edging the crank and/or micropolishing as well- i can get both done pretty cheap by a reputable local motor builder. $100 or make offer



================================================== ======

94-01 Integra LS Dash
Peanut Butter color with black accents
includes cluster, bezel, under steering wheel panel, glovebox, all ac vents, main ac control (direction fins are slightly broken and small crack in each side of control unit as seen in pics), cruise control button, dimmer switch, passenger airbag and clock. probably want to keep this local as i have no idea how much shipping will be on this bad boy but its up to you. slightly dusty from sitting and also a few imperfections (im sure but havent looked). cluster has 94,xxx on it and hasnt been used for about 1.5 years- i was gonna do a dash swap in my 95 eg cx but it was stolen before i completed the changeover. make me an offer




================================================== ======

Honda civic 99-00 SI black hood
desirable fbp hood (flamenco black pearl paint code)
removed for a carbon fiber at 78k
small imperfections in hood and one minor ding (as seen in pics)
dusty from sitting under my patio for a few monthes, ever so slightly faded but thats just dust in the pics. you can see the mirroring in the pics, paint still looks pretty good. SOLD to Hamda




================================================== ======

DEI (Viper, python, clifford, etc) backup battery alarm
for those of you that are unfamiliar, this unit is an alarm siren with a battery attached to the rechargeable 9v battery inside. what it does is stores a charge off your main battery and goes off in sequence with your other siren (or by itself) and WILL NOT shut off unless you turn the key in the back. the thief can cut the wires, disconnect your main battery, etc and the alarm will continue to go off until the key is inserted in the back and turned. very useful device and i currently have one (along with a few other security measures) in my car. its made by DEI so its quality and none of that ebay crap. there are 4 connecting wires that you can grab the diagram for off of DEI's website. BOTH keys are included so you can have a spare and also the mounting bracket to put the siren wherever you want. the siren is a little scratched up from sitting in the back of my car for a few monthes (forgot about it since i already had one installed) but should function flawlessly as its never been used. the part number is 515R. this will work with ANY alarm systemoffer me



================================================== ======

JG Edlebrock high compression piston oil cap
these things are pretty rare, it took me forever to find when i was doing my all motor project and really just sets off the valve cover. its a little scratched up but doesnt look bad at all and im sure you could polish it up if you want. it just looks sick in general and id put it on my new motor if i didnt already have the skunk2 oil cap to match my skunk2 camseal and skunk2 vtec solenoid cover. offer me



================================================== ======

Miscellaneous Crap

JL Audio factor 12" w7 box- black carpet, terminal cup intact, dirty from sitting outside but no flaws in carpet from what i can see- just could use a good vacuum and cleaning. im not sure if i still have the 3 bars that go across the front as a grill but ill look for them if i get any interest in this. the wood is very thick and wont crack like the boxes youd get from best buy or wherever. this is a quality box that can handle very hard hitting 12" subwoofers, id rate it up to about 150db or so. can measure box dimensions upon request but did fit under my integra cargo cover. lowball me
box dimensions:
21" wide
17" deep
16.5" high
and the diameter of the sub hole is 10.5" across



92-95 civic oem corners
used for about 6 monthes after i bought the car. slight imperfections as seen in the pictures. not sure if this will fit the 4dr as well, but it will fit coupes and hatches for sure. small crack on driver side but i dont think it leaks through. lowball me



b or d series transmission halfshaft
dont remember which tranny this is for, maybe you can tell from the pics. slightly rusted but should function fine. offer me


b or d series fuel rail
i believe this fuel rail came off of a jdm b16 but ive just had it sitting for a while so i cant remember, hopefully you can tell based off the picture. i dont know much about it as it was given to me by a friend about a year ago SOLD to civteck84


94-01 integra ls center console (no armrest)
peanut butter colored, pretty dirty and has some imperfections as seen in the pic, needs some cleaning and tlc. not sure if this will fit in civics lowball me


92-95 civic dx cluster
automatic cluster, purchased from junkyard about 1.5 years ago. not sure if it functions or not. removed at 200,xxx miles. comes on a full tank lowball me



Modified by zeimbo at 10:23 AM 3/15/2007


Modified by zeimbo at 8:33 PM 3/15/2007


Modified by zeimbo at 8:35 PM 3/15/2007


Modified by zeimbo at 5:20 PM 3/18/2007


Modified by zeimbo at 6:35 PM 3/18/2007


Modified by zeimbo at 10:42 AM 3/19/2007


Modified by zeimbo at 10:47 AM 3/19/2007


Modified by zeimbo at 5:51 PM 3/20/2007


Modified by zeimbo at 7:20 PM 3/23/2007


Modified by zeimbo at 1:53 PM 3/24/2007


Modified by zeimbo at 5:24 PM 4/3/2007

 

bump for the prowedge box. i wouldnt say 150db though can you measure the cut out i have a 13 and i can use this box if it fits.

 

well i had it powered by a 1000.1 and i think it was hitting about 130ish and that box was solid as a rock. the baffle is a solid 1" and i think actually all sides are 1" as well, but i think they used hdf wood instead of mdf which can withstand even more punishment, either that or even just regular mdf is pretty tough.
ill measure it tomorrow but you can also talk to a local woodshop or even tweeter and im sure that they can router the hole to make it fit the 13.5"

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zeimbo &raquo;</TD></TR><TR><TD CLASS="quote">well i had it powered by a 1000.1 and i think it was hitting about 130ish and that box was solid as a rock. the baffle is a solid 1" and i think actually all sides are 1" as well, but i think they used hdf wood instead of mdf which can withstand even more punishment, either that or even just regular mdf is pretty tough.
ill measure it tomorrow but you can also talk to a local woodshop or even tweeter and im sure that they can router the hole to make it fit the 13.5"</TD></TR></TABLE>

i had one a year ago and i sold it so i know all about the box already. going from 150db to 130db is like going from motorcycle noise to a jetplane. lol you dont have the bars or the black laminate for it? I think JL drilled the holes to hold the laminate all the way through. so its leaking where the screws were right?

 

you don't know where that fuel rail was off of? cuz i'm looking for one for a b18b...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by XaznkewlguyX &raquo;</TD></TR><TR><TD CLASS="quote">i had one a year ago and i sold it so i know all about the box already. going from 150db to 130db is like going from motorcycle noise to a jetplane. lol you dont have the bars or the black laminate for it? I think JL drilled the holes to hold the laminate all the way through. so its leaking where the screws were right?</TD></TR></TABLE>

hehe well actually, a jet taking off is about 120 or 125 and i would know because my friend is in the navy and used to be a jet mechanic. but i know that there is a big difference between 130 and 150db, but the box is just so solid that i think it can take a lot beating so maybe like 140db. anyways tho, the holes dont go all the way through but ill have to see if i can find the grill bars. and is the black laminate thing the ring that pressfits around the silver part of the sub?

 

bump

 

bump

 

bump

 

up

 

bump

 

si hood= sold
cam seal + fuel rail= sold

 

sub box dimensions added and pm's replied

 

bump

 

bump

 

bump

 

pm's replied

 

nightly bump

 

taking offers on everything..
dont be afraid to lowball as the worst i can say is no

 

lowered prices

 

nobody needs injectors?

 

bump

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote &raquo;</TD></TR><TR><TD CLASS="quote">Custom Products (CP) carb eo exempt intake sticker
have 2 of these available. you can either slap these on your intake or my friend used to roll one of these on his turbo kit chargepipe and fool most of these stupid sd cops so they wouldnt hassle him. offer me</TD></TR></TABLE>


oh damnnn these are old i know ive had one on my cold air for about 3years lol how much i asking for them?

 

looking for offers. something reasonable tho, i mean i dont hate on lowballers cuz i know how it is, but some guy offered me $5 shipped i havent had these ones for that long tho, theyve only been sitting for like 4 monthes because im turbo and i also have a greddy kit with carb eo sticker

 

bump y0!