FULLYBUILT LS/VTEC SETUP, SFP, GARRETT, PRECISION, GREDDY, ETC. PART OUT!!
Im selling my FULLY BUILT LS/vtec setup. Ive only ran it with LS/vtec for 200 miles or so (I RARELY drive my car, I hardly have any time
) The motor is built with top notch parts. No corners were cut. The bottom end has about 15k miles on it. Nothing wrong with the bottom end. Top end has approx 200 miles on it. Turbo kit is pretty new.
Turbokit:
SFP Turbo Manifold- SOLD
Garrett t3/t04e 60 trim (200 miles, BOUGHT BRAND NEW) SOLD
Precision 1000c Injectors (400 miles, BOUGHT BRAND NEW) $250
AEM Fuel Rail- SOLD
Oil lines(return and feed)-SOLD
2.5 Inch DP- $135
Greddy PROFEC- MAKE OFFER
Greddy Type 24 FMIC- $300
FULL IC piping- $175
HKS SSQV BOV- $125 ($275 w/ piping)
Turbonetics EVOLUTION- $175
Head(COMPLETE)(Valve Cover, Dizzy, Solenoid, EVERYTHING COMPLETE!!!)
B16 head
Blox Dual valve springs and retainers (bought from spoolin performance
Ferrea Valves (Bought brand new)
AEM cam gears
b16 cams
$1100
Block
B18b1 block
Benson Sleeves(83mm)
CP pistons (9:1)
Eagle H Beam rods
ACL Bearings
ARP headstuds
Balanced and Blue printed
Block was built by Laskey racing
$2000
Golden Eagle LS/vtec minus HEADGASKET
EVERYTHING BUT HEADGASKET- $125
Greddy FMIC


Garrett T3/T04e




Precision 1000cc Injectors

Head


Fuel rail

SFP Manifold


BOV

Modified by B18T3T4 at 12:09 PM 3/18/2007
Modified by B18T3T4 at 12:09 PM 3/18/2007
Modified by B18T3T4 at 7:46 PM 3/18/2007
Modified by B18T3T4 at 7:27 PM 3/19/2007
) The motor is built with top notch parts. No corners were cut. The bottom end has about 15k miles on it. Nothing wrong with the bottom end. Top end has approx 200 miles on it. Turbo kit is pretty new.Turbokit:
SFP Turbo Manifold- SOLD
Garrett t3/t04e 60 trim (200 miles, BOUGHT BRAND NEW) SOLD
Precision 1000c Injectors (400 miles, BOUGHT BRAND NEW) $250
AEM Fuel Rail- SOLD
Oil lines(return and feed)-SOLD
2.5 Inch DP- $135
Greddy PROFEC- MAKE OFFER
Greddy Type 24 FMIC- $300
FULL IC piping- $175
HKS SSQV BOV- $125 ($275 w/ piping)
Turbonetics EVOLUTION- $175
Head(COMPLETE)(Valve Cover, Dizzy, Solenoid, EVERYTHING COMPLETE!!!)
B16 head
Blox Dual valve springs and retainers (bought from spoolin performance
Ferrea Valves (Bought brand new)
AEM cam gears
b16 cams
$1100
Block
B18b1 block
Benson Sleeves(83mm)
CP pistons (9:1)
Eagle H Beam rods
ACL Bearings
ARP headstuds
Balanced and Blue printed
Block was built by Laskey racing
$2000
Golden Eagle LS/vtec minus HEADGASKET
EVERYTHING BUT HEADGASKET- $125
Greddy FMIC


Garrett T3/T04e




Precision 1000cc Injectors

Head


Fuel rail

SFP Manifold


BOV

Modified by B18T3T4 at 12:09 PM 3/18/2007
Modified by B18T3T4 at 12:09 PM 3/18/2007
Modified by B18T3T4 at 7:46 PM 3/18/2007
Modified by B18T3T4 at 7:27 PM 3/19/2007
I WILL GET BETTER PICS OF THE MOTOR
MOTOR IS COMING OUT IN A COUPLE DAYS, JUST LOOKING TO GET SOME INTEREST FIRST!!
Motor with other setup (never ran)


ONLY CURRENT PIC (how it looks, dirty)
MOTOR IS COMING OUT IN A COUPLE DAYS, JUST LOOKING TO GET SOME INTEREST FIRST!!
Motor with other setup (never ran)


ONLY CURRENT PIC (how it looks, dirty)


