Im about to buy a FA next week and still got some money left.. i found a cheap f20c low millage and a rsx type s tranny and i want to know if its compatible, like i heard from some guy (BS OR NOT)... i'll come back to check your answers :D thanks guys

Simpo

disabledjoy@hotmail.com (msn messenger if you want to talk about it)

 

uhhh i really doubt it just 'bolts on' f20c is a rwd motor, rsx tranny is a fwd tranmission...

 

the guy told me his cousin had that setup as a fwd car!!! !!

 

They turn different ways.

 

No, they both turn clockwise. Its already been done and i've seen pictures, but with an adapter plate, i think.

 

heres a pic......i had an f20 motor in my shop at one time and lined it up with a K tranny...the top 2 bolts line up perfectly but nothing else.

 

NICE! is that the hondata eg?

 

This's old news but here it is anyway:

http://www.prototyperacing.com/f20kit.htm

Pirate

 

someone get some pictures of the engine side mount... You can see the tranny mount, and no other mounts... OOOOH, magic floaty motor voodoo!

 

Photo is photochopped. Look at the floor.

 

i want to see it on a dc2 if possible -

 

i thought the k can be build more then f

what would be the benifits of doing this

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by williejohnson &raquo;</TD></TR><TR><TD CLASS="quote">i thought the k can be build more then f

what would be the benifits of doing this</TD></TR></TABLE>

 

f20c is a very reliable motor also, pushing the envelope never hurt. as to the guy who said it was photoshopped, look at the camera flash angle of incidence and
the fact that the shadows behind the bellhousing are consistent with it being
in the actual photograph. just an observation

mike

ps: I too would love to see that setup in an integra

 

it has been done but it required extensive modification to the bell housing of the k-series transmission