I have a 95 civic dx with apexi n1 99 spec coilovers.The rear coilovers have been removed before but this time im having a problem.Im trying to reinstall the coilovers in the rear but the bottom of the coilover will not fit inside the lca.Does anyone have a solution to this? its really annoying

 

Are you doing this on the ground or lift or jackstands?

 

Im on the ground with jackstands on the rear

 

You need to get a prybar and open the lca up so it will accept the shock. We had to do this when we replace the stock sussy with the Mugen gootness.

 

thanks guys

 

damn this is not working for me

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spoonef &raquo;</TD></TR><TR><TD CLASS="quote">damn this is not working for me </TD></TR></TABLE>

It takes some muscle... you do have muscles right?

I think what we did was get the shock somewhat into the LCA and then used the prybar to slightly open it up.

 

Im a puny little african .The bottom of the coilover is ready to slip right in and ive tried but its not working.