i have an odb2 h22 what computer should i use jdm should i go step down and them what and if i do a step down what do i have to rewire since the car is odb2 and the motor. Or will the odb 2 work fine. The car is 2001 accord 5sp

 

any body somebody

 

I have a 98 H22A4 in my 97 Accord....both obd2. When I smog, I use my stock LX computer....passes with flying colors. I swap it with the JDM P5M (no immobilizer) for everyday driving.

 

so everything is fine with your odb2 computer no codes.

 

stock lx ecu with h22 and no CEL?

 

nope...no check engine light. Thats how I was able to pass the state ref in CA....however, my ref didn't do a physical check of what computer I was using. He just plugged in and made sure everything reads ok and that I didn't have a JDM engine. When I install the LX computer, I have to run the car for about a month so everything will check out when I smog. The smog computers don't see JDM computers. Thats how I was able to pass my 97 Accord (OBD2).

 

thank you so your saying everthing should be fine with my odb2 swap and computer even thou i have a 2001

 

Well...it worked for the car and engine I used. Not sure if it will work for you.