Keep in mind that the number 2 and 3 and number 4 and 5 plugs are the same.

Are the number 1 and 2 plugs in the right place?

Where do the number 3, 4, and 5 plugs go.

Just trying to figure some of this out.






[Modified by fire7882, 5:28 PM 5/21/2002]

 

Got some wire colors? Can't tell from that far off.

 

Here are some of the sensors that are on the motor. I don't know what plugs into th one on the back of the block or the one on the intake. I also don't know what plugs into the sensor with the 2 prongs.


Wire colors are as follows

plug 1 2 wires (blue/yellow)(yellow/black)
plug 2 3 wires (yellow/white)(red/blue)(green/white)
plug 3 3 wires (yellow/red)(green/white)(white)
plug 4 2 wires (green/white)(red/yellow)
plug 5 2 wires (yellow/black)(red)


[Modified by fire7882, 5:03 PM 5/24/2002]

 

ttt

 

the pic on left is IAT. The pic on right from bottom to top is oil pressure, water temp, and knock.

 

I'll look up your wire colors tomorrow when I get a chance.

 

thanks for the help provided and the help to come.