all these parts are taking up too much space in the attic and garage. I'll never use them again. i'd feel bad discarding parts that other may have use for in the trash so....
more specific pics are avaible upon request. i'm paypal verified with a few vouches.
accepting reasonable offers.
please bump if you view. thanks

<FONT COLOR="orange"><FONT SIZE="7">pics </FONT></FONT>

<FONT COLOR="red"><FONT SIZE="6">ed6 ac parts:</FONT></FONT>
compressor
condesnser fan
evap coil w/o housing and styrofoam
refer lines
evap housing mounting brackets

<FONT COLOR="red"><FONT SIZE="6">ed6 exterior/body parts:</FONT></FONT>
new front bumper cover (aftermarket).
(2) rear bumper covers.
(2) front R fenders.

<FONT COLOR="red"><FONT SIZE="6">suspension:</FONT></FONT>
da9 front ucas
da9 rear lcas w/oem bushings removed
da9 compensator arms
kyb bumpstop
various es bushings w/o sleeves. i have rear lca bushings for 88 and 89-91 rear lcas and the bushings for an ED steering rack.

<FONT COLOR="red"><FONT SIZE="6">ed6 interior parts:</FONT></FONT>
88/89 style cluster cover
88/89 instrument cluster w/tach
gas fill door cable
l/r/center diffusers
digital clock
dimmer switches
rear window defogger switch
various interior trim
coin trays
int. door handles
climate control (fits hatches, sedans and wagons)
89 si underdash fusebox

<FONT COLOR="red"><FONT SIZE="6">b series parts:</FONT></FONT>
1st gen b16 IM (needs a tb, iacv, iat sensor and injectors)
1st gen b16 flywheel
modified p73 IM. inlet is port matched to accept a 70mm tb. runners are polished. IM will come w/ an obd1 iacv.
(2) sets of p&h injectors
set of saturated obd1 injectors
(2) 94+ b series fuel rails

<FONT COLOR="red"><FONT SIZE="6">electrical:</FONT></FONT>
d15b2 alternator
(2) sets of obd1 ecu clips
obd1 distributor/injectors/o2 sensor clips
block off plugs
(3) 4 wire o2 sensor
resistor box
map sensors (3 firewall and 2 tb mounted)

<FONT COLOR="red"><FONT SIZE="6">brakes:</FONT></FONT>
DA9 brake lines
4040 proportioning valve
booster check valve





Modified by eda6 at 11:13 PM 2/25/2007

 

how much for the ed6 clock

 

pmed

 

ttt

 

a little bumpage

 

Bump cause i viewed and sent you a PM

 

thank you

replied to pm