I am moving and don’t want to take this stuff with me, so I’m giving it all away. Must be gone by the last week of March. All is located in Westchester County, NY.

I will ship parts, but you will pay for shipping + paypal fees. I reserve the right to add a few bucks for my time to find a box, pack it up and bring it to Mailboxes Etc. or the post office. If you try to negotiate shipping rates with me, I will not respond.

Here we go……………


Stock EG Si airbox and snorkel – free + shipping




EG Automatic tranny mount – free + shipping




EG upper steering column cover, black – free + shipping




EG lower steering column steel cover (goes uinderneath plastic cover – free + shipping




EG stock shifter w/ **** – free + shipping




EG pulleys: PS pump and alternator – free + shipping




EG lower header/downpipe/exhaust manifold support – free + shipping




EG evap canister – free + shipping




EG interior light cover, sedan only (I think) – free + shipping




UNKNOWN B series upper motor mount – free + shipping




B16 stock cams. Appox 70,000 miles. In good condition and well within service limits.- free + shipping



B series themostat housing with thermoswitch bung. Outside is heavily corroded – free + shipping




Hatchback rear cargo cover clips, brand new. – free + shipping




EG Wiring. Man, I’ve got a ton of wiring:

EX/Si ECU wiring harness. Complete at the pinouts and very few cuts.- free + shipping



One of the plugs has been cut on the motor side of the harness.




This harness runs accessory functions on the left side of the engine compartment. It plugs in under the dash on the drivers side, passes through the firewall and connects to the washer pump, cruise control, brake fluid reservoir, etc. It is uncut and MINT condition. It will not work with Si’s or any hatch with a rear wiper. free + shipping




This connector runs motor functions on the left side of the engine compartment. It’s cut, but the connector, which plugs in under the dash on the driver’s side is good. Maybe you can use it.- free + shipping




Underhood fuse box harness. All connectors are there, but there’s cuts all over the place. free + shipping




Service connector (left) and tailgate harness connector (right) – free + shipping




Non-VTEC engine wiring harness connectors, car side. – free + shipping




Wire harness firewall grommets. One has a cut in the boot, the other it cut all the way through. Seal with electrical tape. – free + shipping





GONE!:

Apexi WS exhaust and what's left of the AC system - sold to 93dabeast
EG ignition and door lock set w/ (2) keys, Ignition switch harness and LS rear mount - sold to Sanda1s
EG AC bracket w/ tensioner - sold to egriffith45
clutch and flywheel - sold to 98ej8coupe

Modified by 94CivicSi at 9:56 AM 3/1/2007


Modified by 94CivicSi at 9:57 AM 3/1/2007


Modified by 94CivicSi at 7:07 PM 3/2/2007

 

I call dibs on the lock set and ignition, i will also take the rear mount

might as well get the ignition harness while im at it... who knows what those theives fucked up under there

 

dibs on the cams and eg air box pmd

 

pm'ed

hey man i will take the exhaust piping if its for a hatch and i will also take all the ac components. let me know when i can come pick this stuff up. thanks

 

pmed for all wiring

 

bump

 

whats the deal with the d series clutch/pressure plate LMK im located in peekskill

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1SLOWej8 &raquo;</TD></TR><TR><TD CLASS="quote">whats the deal with the d series clutch/pressure plate LMK im located in peekskill</TD></TR></TABLE>

Has probably 40,000 miles on it. It was on my D16Z6 when I pulled the motor and put a B16 in. After my B16 was stolen, I put the Z6 back in with a new clutch and PP.

I can't really remember the Clutchmasters heirarchy of clutch products, but this was a "stage one" application. Uprated springs on the disk and PP, organic disk. Was pretty heavy compared to the ACT's I've had.

 

can i pick up clutch and flywheel?

 

bump for this guy ..... my undercover NYR mod

 

hey nate wassup, ur moving? hit me up on the pmz. I'll take the cams and the stock EG airbox setup. I can pick-up whenever just give me 15mins. lol, and i'm off this entire weekend so lmk

I'll take everything if u don't wanna ship it lol