1989 Honda CRX SI, Turbonetics Turbo, B16, Wilwood Brakes $6500 located in Cleveland, Ohio
CAR IS ON EBAY
http://cgi.ebay.com/ebaymotors...d=1,1
I decided it is time for me to sell my 1989 Honda CRX Si.
It is in very good condition and is very tastefully moded.
Motor:
-P30 B16 (with papers from japandirect.com, they pull motors from running cars themselves in japan, tear them down and rebuild them) installed last year
-Turbo kit (Turbonetics t3/t4 turbo, an SS Autochrome equal length manifold with the weld reinforced, Turbo XS RFL blow off valve, intercooler, Custom 3" downpipe, custom intercooler piping, Tuned with Crome, Walbro 250 LPH fuel pump, DSM 450cc injectors, and a turbo xs boost controller) also installed last year
-Toda Flywheel
-Clutchmaster stage 3 clutch
-Stage 2 axles
-ITR intake manifold
-NGK wires/plugs (plugs are changed every other oil change, i do oil changes with mobile 1 synthetic every 1500 miles, and use an OEM Honda s2000 filter every time
-Dual core radiator, with summit slim fan
-Password JDM magnetic engine/transmission oil drain plugs
-Custom 3" exhaust, with a 3" Magnaflow muffler
Exterior:
-Painted Gunmetal 2 years ago with a 5 year warranty
-91 Si front and rear bumpers
-HID 12000k low beams
-OEM mud flaps
Interior:
-New Black carpet
-Newly reupholstered 91 Civic Si seats
-JDM gauge cluster
Electronics:
-Beltronics LP905 laser jammer
-Autometer sport comp: air/fuel, oil temp, oil pressure, and Boost gauges
-High end Sony CD player
-4 Alpine Speakers
-Optima battery relocated to the trunk
Suspension/Brakes:
-Wilwood 4 piston calipers up front
-GSR rear disk conversion
-40/40 Prop valve
-15/16 master cylinder
-lowered on Tein SS, with Tockio Illumina shocks
-Inovative mounts traction bar
The price is $6500 firm, feel free to ask any more questions you guys might have
-Roman (440)227-0350 or teler86@yahoo.com
1

2

3

4

5

This is a link to more pictures I did not want to put them up because I wanted you 56k guys to actually load :D
http://s43.photobucket.com/alb...t=all
Modified by teler86 at 10:52 PM 3/11/2007
Modified by teler86 at 11:05 AM 3/12/2007
http://cgi.ebay.com/ebaymotors...d=1,1
I decided it is time for me to sell my 1989 Honda CRX Si.
It is in very good condition and is very tastefully moded.
Motor:
-P30 B16 (with papers from japandirect.com, they pull motors from running cars themselves in japan, tear them down and rebuild them) installed last year
-Turbo kit (Turbonetics t3/t4 turbo, an SS Autochrome equal length manifold with the weld reinforced, Turbo XS RFL blow off valve, intercooler, Custom 3" downpipe, custom intercooler piping, Tuned with Crome, Walbro 250 LPH fuel pump, DSM 450cc injectors, and a turbo xs boost controller) also installed last year
-Toda Flywheel
-Clutchmaster stage 3 clutch
-Stage 2 axles
-ITR intake manifold
-NGK wires/plugs (plugs are changed every other oil change, i do oil changes with mobile 1 synthetic every 1500 miles, and use an OEM Honda s2000 filter every time
-Dual core radiator, with summit slim fan
-Password JDM magnetic engine/transmission oil drain plugs
-Custom 3" exhaust, with a 3" Magnaflow muffler
Exterior:
-Painted Gunmetal 2 years ago with a 5 year warranty
-91 Si front and rear bumpers
-HID 12000k low beams
-OEM mud flaps
Interior:
-New Black carpet
-Newly reupholstered 91 Civic Si seats
-JDM gauge cluster
Electronics:
-Beltronics LP905 laser jammer
-Autometer sport comp: air/fuel, oil temp, oil pressure, and Boost gauges
-High end Sony CD player
-4 Alpine Speakers
-Optima battery relocated to the trunk
Suspension/Brakes:
-Wilwood 4 piston calipers up front
-GSR rear disk conversion
-40/40 Prop valve
-15/16 master cylinder
-lowered on Tein SS, with Tockio Illumina shocks
-Inovative mounts traction bar
The price is $6500 firm, feel free to ask any more questions you guys might have
-Roman (440)227-0350 or teler86@yahoo.com
1

2

3

4

5

This is a link to more pictures I did not want to put them up because I wanted you 56k guys to actually load :D
http://s43.photobucket.com/alb...t=all
Modified by teler86 at 10:52 PM 3/11/2007
Modified by teler86 at 11:05 AM 3/12/2007
damn nice rex. the only thing anyone can hate on is the ssac manifold, but you said the welds were reinforced, so it should be nice as hell!!! you got any power numbers for this car? that always helps sell cars! good luck with the sale!
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
teler86
Vehicles for sale
28
Mar 13, 2007 07:59 AM




