Looking for any pics to see how far it sticks out,
http://www.1010tires.com/WheelOffsetCalculator.asp
Is showing 4mm more on inside and +30mm on outside over stock
but that doesnt account for camber/lowered?
Search hasn't returned anything helpful
Thanks in advance

 

15x7 kosei k1s i believe the offset is 33mm, picture will be removed at owner's request

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TigerIntegra &raquo;</TD></TR><TR><TD CLASS="quote">15x7 kosei k1s i believe the offset is 33mm, picture will be removed at owner's request
</TD></TR></TABLE>

I believe those would be no more than a 38mm offset.

 

The pic. posted is too difficult to see. Here is a pic. of a 33mm offset wheel on an R.

http://www.imagestation.com/pi...0.jpg

pic courtesy of team bukkake sucks

 

If it helps, I can take some pictures of a 15x6.5 +38mm , for reference.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Comp97GSR &raquo;</TD></TR><TR><TD CLASS="quote">The pic. posted is too difficult to see. Here is a pic. of a 33mm offset wheel on an R.

http://www.imagestation.com/pi...0.jpg

pic courtesy of team bukkake sucks</TD></TR></TABLE>

Those Volk?

 

Closest pic i have right now. 16x7 +33 offset

Doesn't stick out at all, sit even with the inside lip on the fender. if i take a curved off ramp from the highway too fast, it will rub. Normal driving i have no problems. But then again, i only have Tein springs! Hope this helps

 

Are those Weds?

 

Yep.

 

Look great

 

they will fit fine

16x7 33+ Volk TE37's


16x7 32+ GABs

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ekay_jeremy &raquo;</TD></TR><TR><TD CLASS="quote">they will fit fine

16x7 33+ Volk TE37's


16x7 32+ GABs
</TD></TR></TABLE>

Nice, thanks for the pic

The reason I was asking was because the 16x7 CE28's i'm looking at come in 48, 42, then 33
If the CE28's fit like those TE's I'll be a happy man =P

 

no problem....if you are ordering the volks brand new you should be able to get it in a 35 and 38 offset as well

 

+32

 

The guy I'm getting them from only has 48 42 and 33 offset's left in stock. From the looks of it I'll be able to run the 33's without any problems. Thanks!

 

picture will be removed at owner's request
+30 offset

 

Man, I was hoping to see some FNO1CR's!!

 

I'm diggin the TE37's

 

I believe these Blitz wheels are 16x8 which would make the need for a +30mm offset much greater.

Nice wheel pics up in hurr. Lovin' the GABS posted earlier

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by smoothe &raquo;</TD></TR><TR><TD CLASS="quote">picture will be removed at owner's request
+30 offset

</TD></TR></TABLE>

 

you'll be fine.......my ces are coming in 16X8 +33 offset.....

if u start rubbing just roll ur fenders a bit....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ekay_jeremy &raquo;</TD></TR><TR><TD CLASS="quote">they will fit fine

16x7 32+ GABs
</TD></TR></TABLE>


HOT