Everything is for sale!!! LQQK! CHEAP PRICES! AWESOME PARTS!
Thread Starter
Honda-Tech Member
Joined: Dec 2003
Posts: 737
Likes: 0
From: Louisville, Ky, USA
Everything is for sale!!! LQQK! CHEAP PRICES! AWESOME PARTS!
Everything up for sale! Gettin out of racing, got some important **** to take care of.
ALL OFFERS CONSIDERED!
GE Triple O-Ring Cam Seals for b-series
I have 2 of them, never used.
Titanium color
$15 a piece shipped
CTR Pulley
Brand New $50 shipped
B16 Cams w/gears
$50 shipped
Summit 12Ga Fuel Cell
Brand New. Paid $109.95
Asking $85 shipped
Exedy Twin Disc Clutch for 92+ B-series
*SOLD*
Bogart Pro-4 Wheels with M&H 24.5x8.5x13" Slicks (tubed)
13" Bogart Pro-4's Custom Powdercoated Black
24.5x8.5x13" M&H Slicks (5 passes)
MT Tubes
Wheels weigh 6.5 lbs a piece
Come with lugs
Missing one bolt in one wheel, has a small scratch around that bolt hole, otherwise perfect. Hold air perfectly. Clears GSR Brakes!
$600 shipped
Aeromotive Eliminator Fuel Pump
*SOLD*
Aeromotive Reg
*SOLD*
JE 84.5mm 9:1 B-series Vtec Pistons with rings
*SOLD*
Carrillo Pro-H Beam Rods with CARR bolts for GSR
*SOLD*
JG Edelbrock Intake Manifold for PR3 Heads
*SOLD*
RC 1000cc Injectors
Used, perfect condition
$300 shipped
84.5mm ERL Sleeved B18C1 block
*SOLD*
Tial 44mm Gate
*SOLD*
Tial 50mm BOV
*SOLD*
ARP GSR Head Stud Kit
*SOLD*
The AFI Forward Mount Turbo Kit
*SOLD*
GSR Obd2 Oil Pump
Used for 500 miles, then motor was torn down. No Failures on it.
$75 shipped
Built B16 Head
Supertech Valvesprings and Retainers
.5mm Oversize Intake and Exhaust Valves
Ported and Polished
gsr cams
Doesn't include valvecover and missing some studs on both sides.
Bought from GSRHB7 on here.
$900 shipped
MSD DIS-4 Ignition Box
Used, works perfect.
$350 shipped
Circuitworx Stage 2 Axle Setup
Circuitworx Stage 2 Axles, Hubs, Intermediate Shaft and Spool.
Used for 500 miles. Everything in perfect condition. This is a stud to stud complete drivetrain. Good for 900+hp and 28"slicks
$1400 shipped
GSR YS1 Cable Tranny
*SOLD*
Set of 4 CBR Coils
Work perfect
$50 shipped
1993 Integra GSR Drag Shell ROller
Frost white 93 gsr
Near flawless interior (minus cuts for the cage in the dash)
Under the dash has been gutted
Chassis has been COMPLETELY rewired with a Summit 18Circuit harness, NO STOCK WIRING AT ALL
Needs new front fenders and a bumper (they are in rough shape, NO WRECK, just dented up)
No PS, No AC, No Radio, No nothing
Still has working power windows, sunroof, mirrors, wipers etc.
JDM One Piece Headlights
JDM tach (9500) in a USDM cluster
Proform adjustable shift light
Custom gauge panel in center vent hole
Suspension
Skunk2 Coilovers On stock struts (not blown)
Skunk2 DC Adjustable UCA's +/- 5*
FullRace Traction Bars
Brembo blanks with Hawk HP + pads all around
Fuel system
Walbro 255 Intank
Stock lines
Cage
8Pt ( needs D bars installed) Race101 Chromoly Cage with Swingouts. Beautiful cage work.
Painted black
Door bars are powdercoated
G-Force 5 point harness
Cage padding
Pretty much you add your powertrain and management, and its ready to go. Im sacraficing it CHEAP simply cause its hard to sell something this purpose built. I drove it on the street no problem.
/Picture%20013.jpg)
/Picture%20014.jpg)
/Picture%20015.jpg)
/Picture%20016.jpg)
Check out this directory for cage pics etc...
http://vtak.geektuned.com/Cage%20Pics/
$1500 OBO as it sits, will be on steelies.
More will be to come im sure as soon as i dig more **** up. Prices are pretty firm, but make me an offer i can't refuse i guess.
Paypal will add 3%
Thanx!
Modified by Vtak at 9:50 PM 2/26/2007
Modified by Vtak at 3:44 PM 2/28/2007
Modified by Vtak at 2:31 AM 3/6/2007
Modified by Vtak at 7:27 AM 3/13/2007
Modified by Vtak at 8:52 PM 3/18/2007
Modified by Vtak at 8:52 PM 3/18/2007
Modified by Vtak at 12:20 PM 4/8/2007
Modified by Vtak at 3:19 PM 4/9/2007
Modified by Vtak at 5:07 PM 5/11/2007
ALL OFFERS CONSIDERED!
GE Triple O-Ring Cam Seals for b-series
I have 2 of them, never used.
Titanium color
$15 a piece shipped
CTR Pulley
Brand New $50 shipped
B16 Cams w/gears
$50 shipped
Summit 12Ga Fuel Cell
Brand New. Paid $109.95
Asking $85 shipped
Exedy Twin Disc Clutch for 92+ B-series
*SOLD*
Bogart Pro-4 Wheels with M&H 24.5x8.5x13" Slicks (tubed)
13" Bogart Pro-4's Custom Powdercoated Black
24.5x8.5x13" M&H Slicks (5 passes)
MT Tubes
Wheels weigh 6.5 lbs a piece
Come with lugs
Missing one bolt in one wheel, has a small scratch around that bolt hole, otherwise perfect. Hold air perfectly. Clears GSR Brakes!
$600 shipped
Aeromotive Eliminator Fuel Pump
*SOLD*
Aeromotive Reg
*SOLD*
JE 84.5mm 9:1 B-series Vtec Pistons with rings
*SOLD*
Carrillo Pro-H Beam Rods with CARR bolts for GSR
*SOLD*
JG Edelbrock Intake Manifold for PR3 Heads
*SOLD*
RC 1000cc Injectors
Used, perfect condition
$300 shipped
84.5mm ERL Sleeved B18C1 block
*SOLD*
Tial 44mm Gate
*SOLD*
Tial 50mm BOV
*SOLD*
ARP GSR Head Stud Kit
*SOLD*
The AFI Forward Mount Turbo Kit
*SOLD*
GSR Obd2 Oil Pump
Used for 500 miles, then motor was torn down. No Failures on it.
$75 shipped
Built B16 Head
Supertech Valvesprings and Retainers
.5mm Oversize Intake and Exhaust Valves
Ported and Polished
gsr cams
Doesn't include valvecover and missing some studs on both sides.
Bought from GSRHB7 on here.
$900 shipped
MSD DIS-4 Ignition Box
Used, works perfect.
$350 shipped
Circuitworx Stage 2 Axle Setup
Circuitworx Stage 2 Axles, Hubs, Intermediate Shaft and Spool.
Used for 500 miles. Everything in perfect condition. This is a stud to stud complete drivetrain. Good for 900+hp and 28"slicks
$1400 shipped
GSR YS1 Cable Tranny
*SOLD*
Set of 4 CBR Coils
Work perfect
$50 shipped
1993 Integra GSR Drag Shell ROller
Frost white 93 gsr
Near flawless interior (minus cuts for the cage in the dash)
Under the dash has been gutted
Chassis has been COMPLETELY rewired with a Summit 18Circuit harness, NO STOCK WIRING AT ALL
Needs new front fenders and a bumper (they are in rough shape, NO WRECK, just dented up)
No PS, No AC, No Radio, No nothing
Still has working power windows, sunroof, mirrors, wipers etc.
JDM One Piece Headlights
JDM tach (9500) in a USDM cluster
Proform adjustable shift light
Custom gauge panel in center vent hole
Suspension
Skunk2 Coilovers On stock struts (not blown)
Skunk2 DC Adjustable UCA's +/- 5*
FullRace Traction Bars
Brembo blanks with Hawk HP + pads all around
Fuel system
Walbro 255 Intank
Stock lines
Cage
8Pt ( needs D bars installed) Race101 Chromoly Cage with Swingouts. Beautiful cage work.
Painted black
Door bars are powdercoated
G-Force 5 point harness
Cage padding
Pretty much you add your powertrain and management, and its ready to go. Im sacraficing it CHEAP simply cause its hard to sell something this purpose built. I drove it on the street no problem.
Check out this directory for cage pics etc...
http://vtak.geektuned.com/Cage%20Pics/
$1500 OBO as it sits, will be on steelies.
More will be to come im sure as soon as i dig more **** up. Prices are pretty firm, but make me an offer i can't refuse i guess.
Paypal will add 3%
Thanx!
Modified by Vtak at 9:50 PM 2/26/2007
Modified by Vtak at 3:44 PM 2/28/2007
Modified by Vtak at 2:31 AM 3/6/2007
Modified by Vtak at 7:27 AM 3/13/2007
Modified by Vtak at 8:52 PM 3/18/2007
Modified by Vtak at 8:52 PM 3/18/2007
Modified by Vtak at 12:20 PM 4/8/2007
Modified by Vtak at 3:19 PM 4/9/2007
Modified by Vtak at 5:07 PM 5/11/2007
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Dec 2003
Posts: 737
Likes: 0
From: Louisville, Ky, USA
Re: (turbo_ls_69)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbo_ls_69 »</TD></TR><TR><TD CLASS="quote">bump cuz i need your paypal to send the money for the wastegate</TD></TR></TABLE>
Gate, bov and kit are pending.
Gate, bov and kit are pending.
