will they fit, u guys like the look
http://cgi.ebay.fr/jeu-de-jant...wItem

 

they should fit ..says they're 4 X 100, +48 offset

 

its just that minis have same bolt as BMW they bolt into the hub, no studs, think they'd look good on a crx.

 

Very nice.

 

Too big for the EF chassis IMO.

Your car will look like a chuckwagon and have rougher ride

 

17s with a funky offset, buy at your own risk.

 

i know thats what im thinking, Latino, sweet looking rims though, i work for a bmw dealer and we sometimes get these cars, the only reason im considering them is i get parts at cost and at $205 a rim, pretty decent for brand new

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmef8vtec &raquo;</TD></TR><TR><TD CLASS="quote">$205 a rim</TD></TR></TABLE>



Reason Why I still haven't gotten decent wheels.

 

I think that while they are stylish rims, there are plenty of better (and even with your deal, cheaper) wheels for a CRX. 17's will make your car handle significantly worse..... despite the title they are by no means mini

 

Bmw/Mini retail $849.00 per rim Canadian dollar, trade price $650.00, whats wrong with that.

 

straight from reynolds&reynolds,

1 36-11-6-755-813 RIM STYLY 90 7JX17
1 1 DIS10 828.50 704.23 570.50 0.00

 

i know there BBS rims, and thats why im considering them

 

I just don't have $1000 to spend on rims when an EF is barely worth that much.

 

well ive been offered $9000 cdn, for my crx and only have just over $8000 in it, so worth it for me, and before u flame, its not worth that much i probably have one of the cleanest crx's in Canada/US, B.C crx with 78000 original km's, with jdm front end,B16 2nd gen. swap, and RSX type S seats, RSX Ebony Ivory pearl white paint job, other then brake upgrade and suspension thats it,cant find a spec of rust on this car, guaranteed she'll last another 20yrs.

 

or the next Moose.

Hope not, though. Sounds beautiful.

 

never seen a moose in my life, catch your drift man, plenty of dear around looking to get crippled, but never say never they are close by.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dr_latino999 &raquo;</TD></TR><TR><TD CLASS="quote">17s with a funky offset, buy at your own risk.</TD></TR></TABLE>

Funky Offset? 48? Not too bad, a little more positive then what Mugen's offers

MF10L runs 40 and 45; m7s, NR, and RNR run 45

But I guess it may be a little off considering mr5s and cf-48s were +38, But you could always roll them fenders....

CORRECTION: But you could always get spacers....


Modified by LightWeightED8 at 6:43 PM 2/28/2007

 

tippyman wasnt flaming you..
i agree though... i dont like paying more for parts then my car is worth.. at least not all at once

 

I think they look nice I seen a eg hatch with them the other day look good

 

the +48 would put them farther into the fenders, so rolling fenders wouldn't help with anythingi in this case. the higher the number + the farther the hub is from the center of the rim. so there is more "rim" from the hub surface inward.

if they were like +30 then you would need to roll your fenders.

17's look stupid on an EF. and even though their BBS why do you want to spend $205 each
get some decent 15's. they will weigh less and your car will thank you for not putting stupid huge rims on it.
spend $185 each on some Enkei RPF1's. 9.5 lbs each.

EDGERACING.COM

 

They definitely won't fit on a crx. They will if it's sitting still but not around any turns. It'll scrape on the control arm. I had some +45 offsets on my rex and it scraped pretty bad.

 

Puke on 17's...

But my 13 inch mugen CF48s (In Sig) and call it a day.

 

mini wheels will fit, friends that work at bmw rock mini wheels on their hondas for daily.

 

i have the stock 15" mini wheels on my crx. my wheels offset works fine. 17s are too big for the crx In my opinon.

 

Correction made, thanks for ketchin that