EF9 JDM part out or sell car?? taking offers
Thread Starter
Honda-Tech Member
Joined: Apr 2002
Posts: 4,281
Likes: 1
From: Hayward, CA 94541, USA
EF9 JDM part out or sell car?? taking offers*SOLD*
***SOLD***
Testing waters...car had been a designated AutoX car from last year after I sold the jdm front and rear seats and installed a custom 6 pt cage..less than 1000 miles on motor. Block sleeved by RS Machines, Assembled by Red Star Racing, Tuned by Dynospot Racing, Fine tuned by Ryan. Kinda lost interest in AutoXing so the car has been sitting in the garage(covered). Would rather sell the car as a whole but who knows...I may just part it out if I don't get any offers. Each item/part is priced accordingly and totals added up. I'm taking reasonable offers for the car...located in the Bay Area.
JDM Parts Price
Front End $650
Side Markers (Stanley) $100
Rear Wing $200
Rear Bumper w/lip $350
Cluster $100
Center Console $75
Tail Lights w/ center vtec garnish $350
Suspension Techniques Sways (front & rear) $200
Suspension (Koni Yellows/GC coilover) $400
Neuspeed Strut bars (front & rear) $100
Side skirts $200
Rear mudflaps $50
Vision CF Hood $300
Flared Fenders (J's) $250
Seats (Sparco Evo) $600
Harness & Camlocks (Sparco) $300
CF Lip (Password JDM) $150
ITR Short shifter/RSX shift **** $150
Roll Cage (DTR Custom) $500
Mugen Pedals $75
Momo steering wheel/quick release $300
Sub totalSub $5,400
Motor
Skunk2 cam gears $100
Toda Cams (Spec C) $600
Valve Springs (Toda) $150
GSR Ported head (Ferrea valves) $600
DTR Header $700
B18 Sleeved block (85mm Wiseco/Eagle rods $1,000
Blueprinted/girdle/itr pan)
Custom Exhaust (2.5" Greddy) $300
Exedy Stage 2 Clutch $150
Cusco oil catch-can $50
Spark plug cover (CF) $75
NGK spark plug wires $50
Valve Cover (red) $100
Toda Flywheel $200
TWM Air box & custom AEM CAI $300
TWM itb $1,000
OBD1 Vtec distributor $120
Hondata S300/P28 ECU (obd1) $500
OBD1 wiring harness jumper $100
Hasport mounts $250
DSM 440 injectors w/resistor box $200
YS1 Tranny w/quaife LSD (cable) $1,000
Walbro Fuel Pump $50
Electronic VSS $75
Sub total $7,445
Wheels
Work Meister S1 (15x8.5 fr/15x7 rear) $1,200
Rear disc brake conversion $150
Sub total $1,350
Interior $5,400
Motor/Tranny $7,445
Wheels $1,350
Total (Entire Car) $14,195
Modified by EF_LSVtec at 10:12 PM 2/12/2007
Modified by EF_LSVtec at 10:35 PM 2/26/2007
Testing waters...car had been a designated AutoX car from last year after I sold the jdm front and rear seats and installed a custom 6 pt cage..less than 1000 miles on motor. Block sleeved by RS Machines, Assembled by Red Star Racing, Tuned by Dynospot Racing, Fine tuned by Ryan. Kinda lost interest in AutoXing so the car has been sitting in the garage(covered). Would rather sell the car as a whole but who knows...I may just part it out if I don't get any offers. Each item/part is priced accordingly and totals added up. I'm taking reasonable offers for the car...located in the Bay Area.
JDM Parts Price
Front End $650
Side Markers (Stanley) $100
Rear Wing $200
Rear Bumper w/lip $350
Cluster $100
Center Console $75
Tail Lights w/ center vtec garnish $350
Suspension Techniques Sways (front & rear) $200
Suspension (Koni Yellows/GC coilover) $400
Neuspeed Strut bars (front & rear) $100
Side skirts $200
Rear mudflaps $50
Vision CF Hood $300
Flared Fenders (J's) $250
Seats (Sparco Evo) $600
Harness & Camlocks (Sparco) $300
CF Lip (Password JDM) $150
ITR Short shifter/RSX shift **** $150
Roll Cage (DTR Custom) $500
Mugen Pedals $75
Momo steering wheel/quick release $300
Sub totalSub $5,400
Motor
Skunk2 cam gears $100
Toda Cams (Spec C) $600
Valve Springs (Toda) $150
GSR Ported head (Ferrea valves) $600
DTR Header $700
B18 Sleeved block (85mm Wiseco/Eagle rods $1,000
Blueprinted/girdle/itr pan)
Custom Exhaust (2.5" Greddy) $300
Exedy Stage 2 Clutch $150
Cusco oil catch-can $50
Spark plug cover (CF) $75
NGK spark plug wires $50
Valve Cover (red) $100
Toda Flywheel $200
TWM Air box & custom AEM CAI $300
TWM itb $1,000
OBD1 Vtec distributor $120
Hondata S300/P28 ECU (obd1) $500
OBD1 wiring harness jumper $100
Hasport mounts $250
DSM 440 injectors w/resistor box $200
YS1 Tranny w/quaife LSD (cable) $1,000
Walbro Fuel Pump $50
Electronic VSS $75
Sub total $7,445
Wheels
Work Meister S1 (15x8.5 fr/15x7 rear) $1,200
Rear disc brake conversion $150
Sub total $1,350
Interior $5,400
Motor/Tranny $7,445
Wheels $1,350
Total (Entire Car) $14,195
Modified by EF_LSVtec at 10:12 PM 2/12/2007
Modified by EF_LSVtec at 10:35 PM 2/26/2007
Thread
Thread Starter
Forum
Replies
Last Post