i have a 88dx and have an si sway with everything but i cant get it to bolt up because the bolts of the braket i got the car from dont thread into the holes in the frame. i went to the hardware store this morn to find bigger bolts with no luck. either to small or to big. 12mm to small 14mm too big. whats going on here i know this can be done. whats the deal?? i want this swaybar on. what can i do? help me out thanks


Modified by 88EF9 at 3:19 PM 2/8/2007

 

Maybe the threads just need to be tapped out. Have you tried this first?

 

there are no treads just to holes in the same location but i looks as if i need some 13mm bolts to fit but where to get those no hardware stores stock 13mm??

 

are you sure you don't have a STD and not a DX? - the STD did not have sway bar

 

nor does the dx only the si came with the rear i hear i have to weld the bracket to the frame to get it to work