Help on H23vtec
Thread Starter
Joined: Sep 2006
Posts: 104
Likes: 0
From: Lincolnton, NC, USA
Help on H23vtec
OK just so i dont get bitched at, yes ive read through this entire thread https://honda-tech.com/zero...age=1
After reading this I have some questions about doing this... I have most the parts now and Im wanting some advice from someone whos done this before... I have an h23 block bored .025 over and the head thats going on is an h22 with crower springs/retainers/stage2 cams.... aem cam gears... Im wanting someone to pm me and help me out through all this cuz im fairly new here but decided to try something different to my lude in my area... If you have experience with this build, please pm me.... Thanks
Edit** fixed the number errors
BTW: WTB .25 oversize type s pistons....
Modified by Lude'n it up yo... at 8:25 AM 2/8/2007
After reading this I have some questions about doing this... I have most the parts now and Im wanting some advice from someone whos done this before... I have an h23 block bored .025 over and the head thats going on is an h22 with crower springs/retainers/stage2 cams.... aem cam gears... Im wanting someone to pm me and help me out through all this cuz im fairly new here but decided to try something different to my lude in my area... If you have experience with this build, please pm me.... Thanks
Edit** fixed the number errors
BTW: WTB .25 oversize type s pistons....
Modified by Lude'n it up yo... at 8:25 AM 2/8/2007
Honda-Tech Member
Joined: Mar 2004
Posts: 15,050
Likes: 3
Re: (mgags7)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mgags7 »</TD></TR><TR><TD CLASS="quote">milled .10 ??!?!?!?</TD></TR></TABLE>
I'll say it again. You already milled the head .10?!?!?!?!?
What kind of help do you want, clay the engine. If you want a good writeup on rebuilding it check this out: http://www.rndauto.com/rantabuild.htm
I'll say it again. You already milled the head .10?!?!?!?!?
What kind of help do you want, clay the engine. If you want a good writeup on rebuilding it check this out: http://www.rndauto.com/rantabuild.htm
Thread Starter
Joined: Sep 2006
Posts: 104
Likes: 0
From: Lincolnton, NC, USA
Re: (mgags7)
im not sure about how much... maybe its .01 but the guy i bought the head from said it had been milled and the number had a one in it.... All im gonna do to the block is type s pistons and balance the crank.... I know what im gonna build but need advice on some assembly things.... and yes i have a helms...
Thread
Thread Starter
Forum
Replies
Last Post
Dabrybry
All Motor / Naturally Aspirated
3
Nov 6, 2008 10:31 AM