Parts for b18c1: Eagle H-beam rods, arp main studs, 3" magnaflow muffler, je pistons, greddy profec
Thread Starter
Honda-Tech Member
Joined: Nov 2001
Posts: 170
Likes: 0
From: JACKSONVILLE, Florida, usa
Parts for b18c1: Eagle H-beam rods, arp main studs, 3" magnaflow muffler, je pistons, greddy profec
I have been doing an engine build for my car for a while and decided to go with different parts and now I have all these parts I need to sell. All parts are new except for the profec b
Here's the list of parts and they are all for b18c1
Eagle H-beam rods: $275 shipped SOLD
ARP main studs: $100 bucks shipped SOLD
Universal 3" magnaflow muffler: $125 shipped
PISTONS SOLD
A set of 9.0:1 JE pistons stock bore with rings, wrist pins, and wirelocks: $150 bucks or best offer.
These pistons were never used but were already installed on another set of rods...but we had to remove them from the rods and there are some scratches on the outer wall of the pistons...where it dips in...like where the wrist pins go in, right by the hole. You will probably need to get new wrist pins and locks.
You can see in this picture where the wrist pin was scuffed...this is why you'll need new wrist pins
You can see in this picture if you look at where the wrist pin goes, there is a scratch on the piston right by the hole
Modified by BLaCKWiDoWSi at 5:02 AM 2/9/2007
Modified by BLaCKWiDoWSi at 12:27 PM 2/10/2007
Modified by BLaCKWiDoWSi at 5:29 AM 2/13/2007
Modified by BLaCKWiDoWSi at 5:30 AM 2/13/2007
Modified by BLaCKWiDoWSi at 5:30 AM 2/13/2007
Here's the list of parts and they are all for b18c1
Eagle H-beam rods: $275 shipped SOLD
ARP main studs: $100 bucks shipped SOLD
Universal 3" magnaflow muffler: $125 shipped
PISTONS SOLD
A set of 9.0:1 JE pistons stock bore with rings, wrist pins, and wirelocks: $150 bucks or best offer.
These pistons were never used but were already installed on another set of rods...but we had to remove them from the rods and there are some scratches on the outer wall of the pistons...where it dips in...like where the wrist pins go in, right by the hole. You will probably need to get new wrist pins and locks.
You can see in this picture where the wrist pin was scuffed...this is why you'll need new wrist pins
You can see in this picture if you look at where the wrist pin goes, there is a scratch on the piston right by the hole
Modified by BLaCKWiDoWSi at 5:02 AM 2/9/2007
Modified by BLaCKWiDoWSi at 12:27 PM 2/10/2007
Modified by BLaCKWiDoWSi at 5:29 AM 2/13/2007
Modified by BLaCKWiDoWSi at 5:30 AM 2/13/2007
Modified by BLaCKWiDoWSi at 5:30 AM 2/13/2007
Thread Starter
Honda-Tech Member
Joined: Nov 2001
Posts: 170
Likes: 0
From: JACKSONVILLE, Florida, usa
Re: Parts for b18c1: Eagle H-beam rods, arp main studs, 3" magnaflow muffler, je pistons, greddy pro
Sorry, the bore on the pistons are stock bore 81mm. thanks for the bump. Let me know
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
BLaCKWiDoWSi
For Sale
7
Feb 12, 2007 08:32 PM
Ekay Jay
For Sale
158
Jul 22, 2005 12:14 PM