Where does this go?
Thread Starter
Joined: Aug 2006
Posts: 51
Likes: 0
From: Bell Gardens, Ca, Los Angeles
Where does this go?
I got my zc block rebuilt but the guys that did the job took everthing off the block to paint it. I can see purty much where everything goes except for these metal plates. Any ideas. Thanks for any help
Honda-Tech Member
Joined: Jun 2005
Posts: 1,614
Likes: 0
From: Charleston, SC
Re: Where does this go? (ZippyZivic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1.6civicturbo »</TD></TR><TR><TD CLASS="quote">those are trust washers and they go on the block at the crank they are basicly spacers to center the crank properly</TD></TR></TABLE>
Member
Joined: Feb 2006
Posts: 1,278
Likes: 0
From: Portland, OR, USA
Re: Where does this go? (LShatchie)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LShatchie »</TD></TR><TR><TD CLASS="quote">yeah you should make sure you have the new ones in the block </TD></TR></TABLE>
Seriously. They are cheap and you should put new ones in.
Seriously. They are cheap and you should put new ones in.
Trending Topics
D Tranny Guru
Joined: Oct 2001
Posts: 8,725
Likes: 8
From: Cincity, OH, USA
dumbass shop?????
How so?
What machine work did they do to the block????? If your too lazy to disassembled it yourself, your gonna pay extra to have it "fully assembled" when you pick it up.
#4 thrust bearings......what did they do with the oil jet in the upper deck?????
How so?
What machine work did they do to the block????? If your too lazy to disassembled it yourself, your gonna pay extra to have it "fully assembled" when you pick it up.
#4 thrust bearings......what did they do with the oil jet in the upper deck?????
Honda-Tech Member
Joined: Jul 2004
Posts: 9,846
Likes: 0
From: VA, USA
Re: Where does this go? (ZippyZivic)
If you have to ask, I hope that you are not planning on doing this assembly by yourself. I recently decided to assemble my A6 by myself, and did alot of research before even considering it. I still don't know if I'm ready, lol. 
Honda-Tech Member
Joined: Jul 2004
Posts: 9,846
Likes: 0
From: VA, USA
Re: Where does this go? (Got_soy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Got_soy »</TD></TR><TR><TD CLASS="quote">maybee they forgot them all together 
</TD></TR></TABLE>
They must have been DSM guys, lol.
</TD></TR></TABLE>They must have been DSM guys, lol.
Re: Where does this go? (Tippyman)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tippyman »</TD></TR><TR><TD CLASS="quote">If you have to ask, I hope that you are not planning on doing this assembly by yourself. I recently decided to assemble my A6 by myself, and did alot of research before even considering it. I still don't know if I'm ready, lol. </TD></TR></TABLE>
its not too hard...lemme know if you have questions...already did mine.
</TD></TR></TABLE>its not too hard...lemme know if you have questions...already did mine.
Joined: Oct 2006
Posts: 20
Likes: 0
From: Edmonton, AB, Canada
Usually those are replaced during the rebuild depending on the condition they're in, they're part of one of the crank bearings right? (not sure if that's the correct term)
Hondas usually arn't that bad, but i'd replace them anyways.
Hopefully the shop you took it too replaced them...
Hondas usually arn't that bad, but i'd replace them anyways.
Hopefully the shop you took it too replaced them...
Thread
Thread Starter
Forum
Replies
Last Post
Combustion Contraption
Southern California (Sales)
4
Nov 12, 2006 10:44 PM