Here's the list of stuff I currently want to buy. I'm not really in the market to buy any of this **** immediately, but only if it's a deal I have to spring on.

So, let the offer's fly! Lemme know what you got!

<FONT SIZE="3"><U>THE LIST:</U></FONT>

- 2.5 Bar or 3 Bar MAP sensor.
- Oil Pressure, Water Temperature, and Boost Guages. (Oil Pressure Guage must be electrical. I don't want oil lines running into the cabin.)
- T3/T4 Turbo, 50 or 57 Trim.
- Tial 38mm External Wastegate. (Dumptube or flange to go with it would be nice...)
- Chipped P06
- TD41 Distributor. (D15B7)
- Click-Style Torque Wrench
- Hallmann boost controller

Please post here or PM me if you have any of this stuff!


I'm selling a chipped PM6 w/ USB and Serial ports with a datalogging cable if anyone cares: https://honda-tech.com/zerothread?id=1893610


Modified by Tippyman at 11:42 PM 2/13/2007

 

man, i only have ONE of those things you have listed. and i'm going to use it for my car.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STREETWERKZ &raquo;</TD></TR><TR><TD CLASS="quote">

man, i only have ONE of those things you have listed. and i'm going to use it for my car. </TD></TR></TABLE>

GIVE IT TO ME.

 

Make your own conversion harness, I didn't do that write-up for no reason

 

Linky?

 

https://honda-tech.com/zerothread?id=1319235

 

So how do you splice in the 02 sensor wires?

 

Oxygen heater was run from ECU to engine bay.
Oxygen content used was stock.
One ground to thermostat.
12 Volt feed from injectors or another constant 12v feed.

 

are you still looking for a turbo,wastegate and bov?

 

Yes sir. Wutcha got?

 

pm'd you

 

pix?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tippyman &raquo;</TD></TR><TR><TD CLASS="quote">
- Oil Pressure and Water Temp Guages must be electrical. I don't want oil and water lines running into the cabin.
</TD></TR></TABLE>

just wanted to comment on your electric not mechanical gauges statement, while true about the oil, mechanical water temp gauges do not let water inside through the line they use a sealed gas filled line and is just as safe (but much more accurate) than the mechanical gauge, you might want to re-think

 

i got a dsm BOV if your still looking

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Crx Jimmy &raquo;</TD></TR><TR><TD CLASS="quote">

just wanted to comment on your electric not mechanical gauges statement, while true about the oil, mechanical water temp gauges do not let water inside through the line they use a sealed gas filled line and is just as safe (but much more accurate) than the mechanical gauge, you might want to re-think</TD></TR></TABLE>

Cool, thanks for letting me know!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by excivicboy96 &raquo;</TD></TR><TR><TD CLASS="quote">i got a dsm BOV if your still looking</TD></TR></TABLE>

Already have a lead on a bov, thanks though.

 

I have the whole Veyron drivetrain, will the W16 fit in your chassis? Four turbos &gt; One turbo

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dr_latino999 &raquo;</TD></TR><TR><TD CLASS="quote">I have the whole Veyron drivetrain, will the W16 fit in your chassis? Four turbos &gt; One turbo</TD></TR></TABLE>

Hmmm... Lemme ask in the Hybrid forum, hold on.

 

i don't know if you want/need an oil pan or not, but check out what i have:
https://honda-tech.com/zerothread?id=1883115

i also have a TD-41U distributor i could sell you.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DelSolDon &raquo;</TD></TR><TR><TD CLASS="quote">

i also have a TD-41U distributor i could sell you.</TD></TR></TABLE>

Price? Pix?

 

ive got some stuff here.....as well as a b15b7 dizzy....

https://honda-tech.com/zerothread?id=1883137

lemme know

 

Pix of dizzy's?

BUMP.

 

looks like you are getting a hold of some of these parts you need.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STREETWERKZ &raquo;</TD></TR><TR><TD CLASS="quote">looks like you are getting a hold of some of these parts you need. </TD></TR></TABLE>

Yes, the list is getting smaller, lol. I'm adding and taking things off as needed.

I got a good lead on a mani, bov, and fmic all at once.

bought injectors today.

 

I have the distributor if interested, 50 shipped