IC Piping + Sialicone couplers + Clamp set - Drg Kit - Integra Civic - B Series GSR Plumbing NYC NY
Thread Starter
Junior Member
Joined: Apr 2004
Posts: 293
Likes: 0
From: New York, NY, USA
IC Intercooler Piping + Silicone couplers + Clamp set - BOV Flange Drag Kit - Integra Civic - B Seri
SOLD
What you see is what you get. This came out of a 95 Intergra GSR Drag Gen III turbo kit. A couple of the clamps are t-bolt.
The coupler to the throttle body is also included although it's hard to see from the pics.
The Blow off valve flange is Blitz-style.
Modified by not2slo128 at 1:00 AM 2/10/2007
Modified by not2slo128 at 2:59 PM 2/27/2007
What you see is what you get. This came out of a 95 Intergra GSR Drag Gen III turbo kit. A couple of the clamps are t-bolt.
The coupler to the throttle body is also included although it's hard to see from the pics.
The Blow off valve flange is Blitz-style.
Modified by not2slo128 at 1:00 AM 2/10/2007
Modified by not2slo128 at 2:59 PM 2/27/2007
Member
Joined: Jan 2005
Posts: 1,995
Likes: 0
From: NW, FL, USA
Re: (not2slo128)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by not2slo128 »</TD></TR><TR><TD CLASS="quote">I wanted to sell as a set. Besides you will need at least the 90* coupler - it's very specific:
2.25" --> 2.5"</TD></TR></TABLE>
On a drag kit the hot side is 2'' and the cold goes from 2.25'' at the intercooler to 2.5'' at the TB
If you plan to run this piping on a larger intercooler you will need 2 reducer couplers. sizes of these ouplers depend on the intercooler but most normal intercoolers are 2.5'' on both endtanks. These reducers usually run $20/piece.
With that said, you really cant buy this without the couplers atleast, you will spend alot of money trying to find specific couplers for these pipes, its already a pain fishing out the extra money for the reduces at the intercooler inlets.
2.25" --> 2.5"</TD></TR></TABLE>
On a drag kit the hot side is 2'' and the cold goes from 2.25'' at the intercooler to 2.5'' at the TB
If you plan to run this piping on a larger intercooler you will need 2 reducer couplers. sizes of these ouplers depend on the intercooler but most normal intercoolers are 2.5'' on both endtanks. These reducers usually run $20/piece.
With that said, you really cant buy this without the couplers atleast, you will spend alot of money trying to find specific couplers for these pipes, its already a pain fishing out the extra money for the reduces at the intercooler inlets.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
ITRfaithful
Forced Induction
12
Jun 30, 2002 08:31 PM
