Ok I just got done tapping my pan and was wondering if it's good enough. Does it look like it has too much of a bend in it or is it ok? I know I tapped it in a kind of bad spot but it's the only place I could think that wouldn't be near the downpipe.






Tell me what you think.

 

that manifold is pretty funky looking....oil drain looks fine though

 

Am I drunk?? Oh nm that's just your pics that are blurry Drain looks fine

 

looks perfect just make sure that the lower side of the hose cant slip off

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Schister66 &raquo;</TD></TR><TR><TD CLASS="quote">that manifold is pretty funky looking....oil drain looks fine though</TD></TR></TABLE>
It is a custom one. I know it is pretty weird but I think I got a pretty good deal on it. I got the Tial WG, mani, and the part of the DP for $225. I think that is a good price considering I see people selling the WG for like $150 alone. And it is a true Tial and not a knock off.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM_EH2 &raquo;</TD></TR><TR><TD CLASS="quote">Am I drunk?? Oh nm that's just your pics that are blurry Drain looks fine </TD></TR></TABLE>
Yea, that is what you get with a camera phone and you don't hold it steady.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MindLess311 &raquo;</TD></TR><TR><TD CLASS="quote">looks perfect just make sure that the lower side of the hose cant slip off</TD></TR></TABLE>
I'm going to put a clamp on it so it should be ok.

 

Ohh shiitttt, log top mount. should be a big hit for budget builder

 

looks good but you should put some clamps on there to hold the hose onto the fittings..but everything else looks good 2 go

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by StolenTeg &raquo;</TD></TR><TR><TD CLASS="quote">Ohh shiitttt, log top mount. should be a big hit for budget builder </TD></TR></TABLE>

Yep, the only thing I'm worried about is that I am going to have to run an FMU because I have an automatic which sucks. I can't find anyone who knows how to make a basemap for my car. I could run a S-AFC but I am going to run a FMU on like 6 psi for now. I still have to do a compression test. Hoping to get it done this weekend. I've also got to put in my oil and water temp sensors for my gauges. I just need to get about another $180 or so to get the FMU, piping, BOV, and an oil pressure gauge and I will be set. I'm going to hit around $733 all together for everything. Then eventually I will upgrade to bigger injectors, a S-AFC, and a Walbro fuel pump.