i tried searching and came up with nothing. is there anyway to fix the ash tray/cig. lighter from sagging on the drivers side.

 

if it sags, you are missing a clip f00l

 

nope all clips are there. all screws are tight. both integra's did it once the ash tray came out.

 

The ghetto fix is to pop off the ash tray, then to affix a screw right underneath the part that's sagging.

 

any pics of where to put the screw?

 

http://www.team-integra.net/se...=1137

 

thanks.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by erikiksaz1 &raquo;</TD></TR><TR><TD CLASS="quote"> http://www.team-integra.net/se...=1137 </TD></TR></TABLE>

Good stuff I have the saggy tray also

 

Thx!! I have a saggy one tooo but Didn't want to say anything because I thought it was just me

 

I thought she was too young to be saggin but I went and out and looked !!!
"it hangs down like sleeve of wizard" guess I'll have to perform some surgury on heR when I get some time.



ps. Borat is a funny movie.

 

I'm not sagging but thats some good info.

 

mine sagged a while ago

so i took it off lol

 

this is the second integra of mine that it has happened to.

 

Just leave it, why put a screw in the console?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rcar97 &raquo;</TD></TR><TR><TD CLASS="quote">Just leave it, why put a screw in the console?</TD></TR></TABLE>

Maybe because the sagging irritates some people? You don't see the screw with the ash tray in place anyhow.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by erikiksaz1 &raquo;</TD></TR><TR><TD CLASS="quote"> http://www.team-integra.net/se...=1137 </TD></TR></TABLE>

WoW, LoL...Someone actually wrote that? The reason why it's sagging with both clips in there is because:

1. Most Parts guys don't know that there is a different clip for each side, so when you ask for a clip, they just give you whatever is more convenient with you.

The real fix to this problem is:

The Driver Side Clip = 90666-SD4-003 x 1
The Passenger Side Clip = 90302-SA4-003 x 1

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by len &raquo;</TD></TR><TR><TD CLASS="quote">1. Most Parts guys don't know that there is a different clip for each side, so when you ask for a clip, they just give you whatever is more convenient with you.

The real fix to this problem is:

The Driver Side Clip = 90666-SD4-003 x 1
The Passenger Side Clip = 90302-SA4-003 x 1</TD></TR></TABLE>

Even better info, Len.

I don't retract my comment about you not showing up at Expo 7 though

 

I've also had this problem - also need to make sure you install the clips in the correct orientation - if one is installed upside/down, that side will sag...