I have the following for sell, some are still in the "testing waters" stage though. location: san jose and irvine CA. i will ship but you have to cover all charges.

1. RCREW header, this is the new design where the fitment was corrected. I welded an additional o2 bung for a wideband and I will include a 2 1/2 in to 3in transition pipe that is already welded on there as well (so you can run a 3in exhaust). I can possibly include a 3inch flex pipe if the downpipe i'm getting already has one.
700$ without the flex pipe.

2. Hytech spec III all motor cams. These are used and are practically new. The cams made me go 12.3@114mph in the 1/4 mile on a stock k24a2 longblock. To give an idea on how much power these produce you can compare these to the spec I's http://www.k20a.org/forum/showthread.php?t=20417
950$ for the cams

3. k24a2 longblock, i bought this as a train wreck motor with on 3-5 miles on it, and i've put about 5-6k miles on it, tuned it once i got it running so the condition is perfect. Includes the hytech valvetrain, rsx-s valveseat base, hytech valvesprings, hytech ti retainers with it installed. And there will be no sensors included because i might need it for my future set up. i can include tsx cams or hytech cams.

- i also have an ACT 6 puck unsprung clutch with a heavy duty pressure plate and lightweight flywheel and a k20a2 6spd tranny (2003) that i could possibly include if the price is right.

2500 with the valvetrain
3400 with the hytech cams
add 700 for the tranny
add 400 for the act clutch lw flywheel and pressure plate

Things I need i'm not selling (like the wiring harness, sensors, etc)

Reason i'm selling everything is because i'm going boost with a 2.0L.

EVERYTHING IS OBO

PM ME FOR INFO


Modified by null. at 1:51 AM 1/22/2007

 

1

 

how much for longblock with hytech goodies?

 

2 updated with prices