hey guys i have a crx, im going to swap a b20 in it and using the y1 trany of a b16 can i use 94-01 axels?

 

it depends on the int shaft that you use. match that.

 

int shaft?

 

Intermediate

 

also called half-shaft if thats makes it any easier, and you have to beat the hell out of them with a hammer to get it off

 

use a 90-93 integra halshaft and axles

 

find out what halfshaft is on it and use thoughs axels

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by leo_69 &raquo;</TD></TR><TR><TD CLASS="quote">hey guys i have a crx, im going to swap a b20 in it and using the y1 trany of a b16 can i use 94-01 axels?</TD></TR></TABLE>

yeah,if you get a 94-01 integra,99-00 si,or delsol b16a3 halfshaft.

 

Here whats I did..I could not find any 90-91 teg int shafts for a good price used.I got the hasport axels..a lil spendy but by the time I would have got a teg int shaft and new axels it would have been close in price....(around my area they wanted to rip me off on int shaft)

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EatSleepJDM &raquo;</TD></TR><TR><TD CLASS="quote">also called half-shaft if thats makes it any easier, and you have to beat the hell out of them with a hammer to get it off</TD></TR></TABLE>

WTF?

 

thanx alot ill be doing my swap soon