Is anyone currently running one or has in the past? Likes? Dislikes? Any problems with them? Ive been ramhorn turbo mani shopping for the last month or so and dont have the cash to drop on a Full Race setup and dont want to run those knock-off OBX junks. The cc-fabs are definatley in my price range just looking to get some feedback before i buy.

 

you will find many mixed reviews on CC-Fab. They have had problems in the past but they are good people and they do nice welding. I bought a manifold from them and I had it in like 2 days.

 

Im going to add a note to that. Every company out here has had problems in the past with people making threads bitching.

 

ive been seeing and reading some great stuff about the guys over at arizona forced induction afi.

 

:: Pulls out the magic 8 ball ::

"Is this guys money safe with "ccfab"?


[Magic8Ball]"Are you out yo damn mind?"[/Magic8Ball]

 

I bought a CCFab topmount about 2 months ago. The downpipe fit perfectly....i dont think you could get better fitment! I have had NO complaints with them at all....I would vouch for Josh and Corey anytime....

 

honesty goes a long way in a successful business

not something CC-fab has been good about so far...

 

as i agree w/ the above statement, i have talked to Josh and Corey on the phone multiple times and they are honest guys. A lot of their stigma stems from Josh's (Hotrex) actions on HMT...not so much on Hondatech.

Lets just put it this way...I will continue to do business through them. I call Josh every once in a while to see what's up and if he has any cool **** i can buy. In a few weeks, i'm sending him the compressor side of my 60-1 and my valve cover to have them both powder coated.

 

I had a major issue with Josh aka ccfab aka hotrex. He is probably still banned from selling at homemadeturbo.com

anyway, you decide. here are some links:
https://honda-tech.com/zero...age=1
https://honda-tech.com/zerothread?id=1668714
https://honda-tech.com/zerothread?id=1656973
https://honda-tech.com/zerothread?id=1665353
http://www.homemadeturbo.com/f...717.0
http://www.homemadeturbo.com/f...307.0
http://www.homemadeturbo.com/f...408.0

 

If you do any business with them..... Talk to Corey. He is a good guy. Too bad things were already too ugly between Josh and I before Corey was able to do anything....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Schister66 &raquo;</TD></TR><TR><TD CLASS="quote">as i agree w/ the above statement, i have talked to Josh and Corey on the phone multiple times and they are honest guys. A lot of their stigma stems from Josh's (Hotrex) actions on HMT...not so much on Hondatech.

Lets just put it this way...I will continue to do business through them. I call Josh every once in a while to see what's up and if he has any cool **** i can buy. In a few weeks, i'm sending him the compressor side of my 60-1 and my valve cover to have them both powder coated. </TD></TR></TABLE>i understand that they are trying to do better, and good luck on that.

but remember after all the **** went down and the thread was made about the business "splitting up"? Corey was going his way and Josh was going another...

who's still doing the welding for Corey? Josh...its just one thing thats kept hush hush as to keep his name out of everything since that name is synonymous with bad business ethics and lies. not very honest if you ask me, claiming a break-up just to make people think that he is no longer a part of the business...

i said it when he was a sponsor at d-series, JUST BE HONEST!! thats all the customer really wants...

 

ehhh, sounds like some mixed reviews. I was checking out the Arizona Forced Induction threads and those mani's look real good, i might go that route instead for only a few more $$$, seems like they have better feedback. Do they have a website? I looked through the threads but couldnt find a web address or any links to their site.

 

they dont have one, just hit up that guy turbojesse, he made a thread or 2 recently, they're in my watched topics.

 

let me shed some light on this:

there are 2 sides to CCFAB- josh, and corey.

Josh is the one who EvEryonE bitches about, scame people, takes their money, long waits on products, blah blah.

Corey on the other hand is the complete opposite! He is a GREAT guy and pleasure to do business with. I purchased my topmount and downpipe directly from him, even with some extra requests (egt, flanges, etc) he had it all made to my spec and on my front porch within 2 weeks of my paying him.

His name on here is "CoreyR" contact him via pm,, hes the way to go. Stay away from josh aka hotrex

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbotime &raquo;</TD></TR><TR><TD CLASS="quote">let me shed some light on this:

there are 2 sides to CCFAB- josh, and corey.

Josh is the one who EvEryonE bitches about, scame people, takes their money, long waits on products, blah blah.

Corey on the other hand is the complete opposite! He is a GREAT guy and pleasure to do business with. I purchased my topmount and downpipe directly from him, even with some extra requests (egt, flanges, etc) he had it all made to my spec and on my front porch within 2 weeks of my paying him.

His name on here is "CoreyR" contact him via pm,, hes the way to go. Stay away from josh aka hotrex</TD></TR></TABLE>how can you possibly stay away from hotrex when he still does the welding for Corey?? you think Corey learned to weld like that overnight?

think about it...

 

Junk...... Takes forever to ship, poor alignment of tubes, horrible welding, and one of the worst collectors I have ever seen. I couldnt even fit bolts into two of my turbine flange holes because the collector was in the way. Spend some money and buy something nice the first time.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ryan89crx &raquo;</TD></TR><TR><TD CLASS="quote">how can you possibly stay away from hotrex when he still does the welding for Corey?? you think Corey learned to weld like that overnight?

think about it...</TD></TR></TABLE>

corey may not do the welding but he can make sure josh does it on time and then corey takes care of getting it shipped asap. As opposed to giving cash to josh for himt o takehis sweet time with.

All i know for sure is i bought from corey directly and got GREAT service, i havent heard any complaints from anyone who has ordered directly from corey, only people who complain are those who order from josh.

And my manifold was pretty steller, great welds, tubes lined up well, collector is really nice too, wish it was welded and smoothed on the inside, but for the price you CANNOT beat it.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ryan89crx &raquo;</TD></TR><TR><TD CLASS="quote">who's still doing the welding for Corey? Josh...its just one thing thats kept hush hush as to keep his name out of everything since that name is synonymous with bad business ethics and lies. not very honest if you ask me, claiming a break-up just to make people think that he is no longer a part of the business...</TD></TR></TABLE>

Yeah, there certainly isn't any break up in place. Corey has for sale threads selling multiple ramhorns and dp's. Anusol (ccfab's current H-T name) is all up in the for sale thread bumping for sale, and telling people to pm him too for info on purchase.

There is no break-up nothing, he's still around. How many chances does a guy get to sell manifolds around here.

 

ccfab's still in business? i thought they broke up. anyways, sure, check them out, but there's a lot of fab guys on honda-tech that are really affordable as well, and are well vouched for. rc autoworks, hermsfab, s-fab, etc. try talking to these guys too; when i was looking for someone to do my setup all of them were very cool and reasonably priced. good luck

 

I got my mani from corey, its ****.

 

I have two ramhorns on the way from Corey and he is great to deal with He was honest and stright forward as one ramhorn is not as pretty welds so that one was discounted and the flanges i wanted put on.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbotime &raquo;</TD></TR><TR><TD CLASS="quote"> but for the price you CANNOT beat it.


</TD></TR></TABLE>

what the expletive is that?

yea you cant beat bad quality.

RLD-FAB ftw. i can honestly say you cant beat their quality to price ratio!

 

Josh was just banned yet again from the forum today, and will continue to get banned if he comes back.

If you wanna hand your cash to someone who get's banned, go right ahead.

 

I dont see whats wrong w/ this pic?



Edit: duh, Im on H-T. It needs to be shiny.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by leed &raquo;</TD></TR><TR><TD CLASS="quote">I dont see whats wrong w/ this pic?



Edit: duh, Im on H-T. It needs to be shiny. </TD></TR></TABLE>

try looking AT THE COLLECTOR!