Made the flanges out of 3/8 flatstock

 

I spy cheater cuts.....

Nice though, overall.

 

i've seen a lot of manifolds being made out of thin wall stuff as opposed to the schedule 10/40 stuff. Maybe i should try it out in the spring.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr Wonderfull &raquo;</TD></TR><TR><TD CLASS="quote">front mount compatible???</TD></TR></TABLE>
i doubt it.....4th runner looks like it be very very close...and the length of the runners espically going down so far

 

wyotech right? im in ASM right now

nice lookin mani

 

Not bad I know how it is to use wyotech's beat up inconsistant welders

Tell mike (instructor in the other class) the TIG king said whats up

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr Wonderfull &raquo;</TD></TR><TR><TD CLASS="quote">front mount compatible???</TD></TR></TABLE>

Very close..but yes

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by delspool &raquo;</TD></TR><TR><TD CLASS="quote">wyotech right? im in ASM right now

nice lookin mani </TD></TR></TABLE>

have fun with that ****! worth it but it still sucked

 

Dont you guys clean your shop? Our shops are spotless.

 

Mounted on the car, i was only able to squeeze one more picture out of my camera, its dead

 

the manifold looks good but i'm not sold on the dp angle off the turbo and the wg dump tube angle back into the dp...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by weiRtech &raquo;</TD></TR><TR><TD CLASS="quote">the manifold looks good but i'm not sold on the dp angle off the turbo and the wg dump tube angle back into the dp...</TD></TR></TABLE>

why not?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by weiRtech &raquo;</TD></TR><TR><TD CLASS="quote">the manifold looks good but i'm not sold on the dp angle off the turbo and the wg dump tube angle back into the dp...</TD></TR></TABLE>

Finally got it out on the road, no surge or anything, Wastgate is working good! I have a date with the dyno soon, ill post results!

 

shop looks good. Im sure they clean up at the end of the day but during the day while its busy, I am sure the shop is going to get out of order.

Nice manifold!!

Josh L

 

manifold looks good

 

what radiator are u using? A Civic one??
Manifold looks good, and i know how difficult it can be. Just finished my topmount, ac and frontmount compatible, it was a pain to construct and weld!

 

manifold looks pretty darn good, but i hope that SS-auto turbo works better for you than most people on here