Fully built b20-vtec engine. 550whp! FS.
Thread Starter
Honda-Tech Member
Joined: Jul 2004
Posts: 3,222
Likes: 0
From: USA
Fully built b20-vtec engine. 550whp! FS.
SOLD SOLD SOLD!
Price is now OBO!
Selling my fully built b20-v motor. Motor made 549 whp 343 torque at 24psi while peeling out on 4th on the dyno.
Bottom end
'00 b20z2 usdm block
RS machine sleeved 84.5mm
Micropolished Honda crank, all new Honda main/rod bearings, honda thrust washers
Crower 4340 steel Billet rods
JE 9:1 pistons
Block was also hot tanked, and main journals were align honed.
Exedy twin disc clutch for 92+ b-series
head
92 Jdm b16a head
Intake ports were mildly port/polished by DH-racing as well as 5 angle valve job
Ferrea stainless valves
all new Oem honda valve seals
supertech springs/retainers
Cometic head gasket
Golden eagle head studs
Edelbrock victorX manifold
Mr. Gasket fuel rail
68mm billet throttle body
Type r Camshafts with Hayame cam gears.
Motor was built by Mike at Extreme parts in august. Car was tuned on S300 Hondata by Dave at Whipfactory. Motor has less then 3000miles on it. I have all receipts for the motor etc.etc. Motor does not smoke, it has 185compression across the board. Great oil pressure. Only reason i'm selling it is because i wanna do something different in my crx for next year *hint k-series.
This engine is basically bullet proof (with the right tuning of course) Price is $4500 with twin disc or $3800 without! What a steal! Motor costed me $10,000+ if your planning on going all out for next year this will save you a lot of $. I did have pictures of the motor getting assembled etc. but i lost them when my computer crashed 
pm me if interested or if you would like to check it out in person. Located in Milwaukee, WI.
Modified by theinfamouskonrad at 12:36 PM 2/3/2007
Modified by theinfamouskonrad at 2:52 PM 2/9/2007
Price is now OBO!
Selling my fully built b20-v motor. Motor made 549 whp 343 torque at 24psi while peeling out on 4th on the dyno.
Bottom end
'00 b20z2 usdm block
RS machine sleeved 84.5mm
Micropolished Honda crank, all new Honda main/rod bearings, honda thrust washers
Crower 4340 steel Billet rods
JE 9:1 pistons
Block was also hot tanked, and main journals were align honed.
Exedy twin disc clutch for 92+ b-series
head
92 Jdm b16a head
Intake ports were mildly port/polished by DH-racing as well as 5 angle valve job
Ferrea stainless valves
all new Oem honda valve seals
supertech springs/retainers
Cometic head gasket
Golden eagle head studs
Edelbrock victorX manifold
Mr. Gasket fuel rail
68mm billet throttle body
Type r Camshafts with Hayame cam gears.
Motor was built by Mike at Extreme parts in august. Car was tuned on S300 Hondata by Dave at Whipfactory. Motor has less then 3000miles on it. I have all receipts for the motor etc.etc. Motor does not smoke, it has 185compression across the board. Great oil pressure. Only reason i'm selling it is because i wanna do something different in my crx for next year *hint k-series.
This engine is basically bullet proof (with the right tuning of course) Price is $4500 with twin disc or $3800 without! What a steal! Motor costed me $10,000+ if your planning on going all out for next year this will save you a lot of $. I did have pictures of the motor getting assembled etc. but i lost them when my computer crashed pm me if interested or if you would like to check it out in person. Located in Milwaukee, WI.Modified by theinfamouskonrad at 12:36 PM 2/3/2007
Modified by theinfamouskonrad at 2:52 PM 2/9/2007
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Jul 2004
Posts: 3,222
Likes: 0
From: USA
Re: (no-nos-ftw)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by no-nos-ftw »</TD></TR><TR><TD CLASS="quote">now thats built 
gl</TD></TR></TABLE>
thats right, you name it and it has it.
gl</TD></TR></TABLE>
thats right, you name it and it has it.
Thread Starter
Honda-Tech Member
Joined: Jul 2004
Posts: 3,222
Likes: 0
From: USA
Re: Fully built b20-vtec engine. 550whp! FS. (aarontrini85)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by aarontrini85 »</TD></TR><TR><TD CLASS="quote">ur only selling the block not the car?</TD></TR></TABLE>
No i am selling the whole engine, as well as the tranny. The car it was in is sold.
No i am selling the whole engine, as well as the tranny. The car it was in is sold.
Honda-Tech Member
Joined: Jul 2005
Posts: 1,083
Likes: 0
From: Port Washington, Wi, United States
Re: Fully built b20-vtec engine. 550whp! FS. (theinfamouskonrad)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by theinfamouskonrad »</TD></TR><TR><TD CLASS="quote"> </TD></TR></TABLE>
looks like that was in your RHD rex! bump for konrad and me buying some wheels off of him soon!
</TD></TR></TABLE> looks like that was in your RHD rex! bump for konrad and me buying some wheels off of him soon!