anyone have any ideas on how to install valve springs with the head on still??

 

compressed air into cylinder through spark plug hole. and snap on sells a valve spring compressor that threads into where the cam cap bolts go in. thats hpw i did mine at least.. btw a magnet will be a good idea to catch those keepers.

 

either that^^^^ or you could get a long 1/4 thick rope and push it down the spark plug hole.

thats how my friend did his, and it worked out ok.

 

those are the 2 ways i was thinkin of doing it...i thinkin gonna do the air one though..just gonna use a compression tester and take off the gauge and put the air compressor nozzel on in...

 

thanks for the fast replys i needed them...im
doin alota work to my car tomorrow and this was the only set back...

 

good luck. its not easy at first but you'll get the hang of it.

 

eyah thats what i plan on lol...i catch on things pretty fast...i mean im only 17 and yet ive built some pretty good motors already

 

https://honda-tech.com/zerothread/1604753