WANT TO BUY A "AEM V2 COLD AIR INTAKE"
Junior Member
Joined: Aug 2005
Posts: 636
Likes: 0
From: Lakewood, wa, usa
Re: WANT TO BUY A "AEM V2 COLD AIR INTAKE" 99 civic si with 98+ jdm type r from hmo (sinanovicha)
so basically what ur trying to say is you need it for an em1...
the motor doesnt matter unless ur running a gsr intake mani then its different...
i dont have the v2 but i do have a aem cold air intake 100$ says its yours... Seattle, wa
the motor doesnt matter unless ur running a gsr intake mani then its different...
i dont have the v2 but i do have a aem cold air intake 100$ says its yours... Seattle, wa
Honda-Tech Member
Joined: Jun 2004
Posts: 1,748
Likes: 0
From: Milwaukie, ORegon, United states
Re: (sinanovicha)
The manifolds are different, for some reason, Honda man decided to make the GSR plenums Ugly, Upside down, and damn hard to maneuver wires in/around.
Basically the GSR manifolds intake port is about 2 inches lower and the intake arm has to be bent to fit under the hood.
Basically the GSR manifolds intake port is about 2 inches lower and the intake arm has to be bent to fit under the hood.
Thread
Thread Starter
Forum
Replies
Last Post