hey guys im just curious to see if i could put 205/50R15's on my DC without rubbing at all on the inside of the fender well?

 

I ran 205/50/15s on my stock gsr blades and now on my 15x7 k1's and did not have rubbing issues.

 

how low is your car in the front?

 

No rubbing here either. I'm using the stock mesh wheels

 

i ran that size when i was slammed and never rubbed

 

thanks... i'm 3in. up front so i think i may raise it up some. but it seems a friend of mine thinks i will rub real bad

 

It'll rub depending on the offset of the wheels you'll be putting those tires on.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DC4KiD &raquo;</TD></TR><TR><TD CLASS="quote">It'll rub depending on the offset of the wheels you'll be putting those tires on.</TD></TR></TABLE> This is true, id think that anything with a 30 or lower offest would have a chance of rubbing with that size tire. Maybe someone can confirm this...

 

Your camber will also play a factor in rubbing.

But many people choose 205/50 over the 195/55. Give it a shot, and if it rubs raise it up a tad.

Ali

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MatMattMatthew &raquo;</TD></TR><TR><TD CLASS="quote"> This is true, id think that anything with a 30 or lower offest would have a chance of rubbing with that size tire. Maybe someone can confirm this...</TD></TR></TABLE>

I would think even a +35 would be pushing it, but I can't confirm or deny this.

Ali