Okay, I test fit one of the GSR Blades today. Keep in mind...I didn't clean them up. I'll save that for when I add some winter tires. *which is why I'm not posting this in the A/C forum* I weighed both wheels + tires for fun. There are variables to consider:

1) The GSR Blades were the same tire size as the Fit Sport OEM tires, but the were Michelin XGT (195/55). They are worn down to the cords on the inside of the tire. I'm sure the tires might vary in weight between them with full tread.
2) I'm using a digital bathroom scale. It's of good quality...but it's just not the same since I had to balance the Fit Sport wheel a little to get it to stay upright without falling over. The GSR blade sat nicely however.

If you can't tell by the pics I weighed the Fit Sport wheel + tire at 35.2 lbs and the GSR Blade + tire at 31.6 lbs.

Anyways, here are the pics. I think they look good...almost like they were made for the car.

 

You gonna paint the blades?

My vote is for bronze.

 

they look nice on the fit

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ITR 00-0477 &raquo;</TD></TR><TR><TD CLASS="quote">You gonna paint the blades?

My vote is for bronze. </TD></TR></TABLE>

As of right now I don't have any plans to. Mine are a little beat up, but I've actually considered using some summer tires on these and then figure out my winter situation later. Possibly get some 14" steelies or HX's for winter.

 

Hey those look really good! I would not paint them personally.

You could also run the blades in front and oems in back for a true 'custom' look

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jetydosa &raquo;</TD></TR><TR><TD CLASS="quote">You could also run the blades in front and oems in back for a true 'custom' look </TD></TR></TABLE>

I'd be mad hardparking USDM style y0!

 

man that looks pretty sweet maybe some white hx's would look good too

 

Looks better than the fit wheels, but pretty beat up looking.
Might be interesting if they were color matched to the car

 

Man, those look nice on there!!! Keep up the good work. They go really well with the fit.

 

dump it on the blades!

 

GSR mesh would also look sweet.

 

That looks GOOOOOOOD!

 

not bad i reckon , only the 2 rims? or u hav all 4 corners?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spoonGD1 &raquo;</TD></TR><TR><TD CLASS="quote">not bad i reckon , only the 2 rims? or u hav all 4 corners?</TD></TR></TABLE>

I have all 4. I was just test fitting 1 of them. I was going to use them for winter, but I've decided to take a gamble and not get winter tires. I'll buy some summer tires for the Blades in the spring.

 

looks like ****! Si wheels would look way beter.

 

I dont think so.

So what is so rough about them. Is it just the clearcoat peeling, rash, etc?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ShinHed &raquo;</TD></TR><TR><TD CLASS="quote">GSR mesh would also look sweet.</TD></TR></TABLE>

thats LS mesh

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Nighthawk R18 &raquo;</TD></TR><TR><TD CLASS="quote">

thats LS mesh </TD></TR></TABLE>

Actually, a few GSR's came with the meshies. I would know, my friends mom's teg has them as well as 1 other friends. The way they came from the dealer.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by J Rod &raquo;</TD></TR><TR><TD CLASS="quote">

Actually, a few GSR's came with the meshies. I would know, my friends mom's teg has them as well as 1 other friends. The way they came from the dealer. </TD></TR></TABLE>

i stand corrected

 

Believe me. Its a VERY common misconception.

I was in the same boat before I got the total WTF factor.

 

lol i believe you.

now i can send someone else the same "wtf" factor

 

i got GSR blades

San Diego

PM me if you want them lol

 

I would go bigger. Go black rim and polished lip. I think a 16" would fit the wheel well better.

 

sell me them blades if you dont use them

 

slam that fit and paint those blades either black or bronze