FS: D series turbo kit part out
Thread Starter
Honda-Tech Member
Joined: May 2002
Posts: 4,306
Likes: 0
From: Why so you can pretend like youre interested, FL/OK
FS: D series turbo kit part out
Still selling all my parts off. Parting entire turbo kit. Turbo, manifold, downpipe, intake arm and filter go as one piece.
2.5 inch charge pipes with Greddy RS bov - SOLD
1992-95 Civic intercooler piping: - intercooler piping to accomodate 6 inch intercooler/charge pipe has Greddy RS on it- piping in good condition with a few defects from cut edges and welding beads
RC 440 injectors w/ clips - SOLD
IHI turbo (no shaft play/spins freely)
exhaust manifold
downpipe w/ o2 sensor
intake pipe with filter
D-series Apexi turbo kit:- [i](IHI turbo, manifold, downpipe - turbo has no play and spins freely. used for under a year) - REMOVED FROM LISTING
The <u>BAD</u>, but NOT really. I purchased this from the original owner, whose car was stolen and recovered with this turbo on it. They scratched off the serial/spec and info on the turbo when attempting to sell it. http://hondamarketplace.com/zerothread?id=1662263
TO ENLARGE PICTURES right click the picture to get the url and change the "s26" to "L26" and add th_ before the IMG
JRC intercooler (BRAND NEW) - $150
Greddy boost and egt gauges with all accessories (a ding on the outer ring of each gauge) - $150
Greddy Profec B ver. 1 (MINT) - $175
oil sandwich adapter - offer
**also adding in (NEW) ACT clutch disc that : If used with ACT's heavy duty pressure plate they rate it at 223 ft-lbs of TQ (more than double stock) and when used with their Xtreme pressure plate they rate it at 270 ft-lbs of TQ**
Feedback from other users:
https://honda-tech.com/zero...age=1
Located in N. FL buyer responsible for shipping charges. 3% for paypal use.
If interested IM/PM or post and I will get back to you. I have a number of references available here, on Club SI, and through Heatware. Feel free to ask about me here or anywhere else. I appreciate it, thanks.
Modified by INVALID at 10:02 PM 11/21/2006
Modified by INVALID at 3:07 PM 11/27/2006
2.5 inch charge pipes with Greddy RS bov - SOLD
1992-95 Civic intercooler piping: - intercooler piping to accomodate 6 inch intercooler/charge pipe has Greddy RS on it- piping in good condition with a few defects from cut edges and welding beads
RC 440 injectors w/ clips - SOLD
IHI turbo (no shaft play/spins freely)
exhaust manifold
downpipe w/ o2 sensor
intake pipe with filter
D-series Apexi turbo kit:- [i](IHI turbo, manifold, downpipe - turbo has no play and spins freely. used for under a year) - REMOVED FROM LISTING
The <u>BAD</u>, but NOT really. I purchased this from the original owner, whose car was stolen and recovered with this turbo on it. They scratched off the serial/spec and info on the turbo when attempting to sell it. http://hondamarketplace.com/zerothread?id=1662263
TO ENLARGE PICTURES right click the picture to get the url and change the "s26" to "L26" and add th_ before the IMG
JRC intercooler (BRAND NEW) - $150
Greddy boost and egt gauges with all accessories (a ding on the outer ring of each gauge) - $150
Greddy Profec B ver. 1 (MINT) - $175
oil sandwich adapter - offer
**also adding in (NEW) ACT clutch disc that : If used with ACT's heavy duty pressure plate they rate it at 223 ft-lbs of TQ (more than double stock) and when used with their Xtreme pressure plate they rate it at 270 ft-lbs of TQ**
Feedback from other users:
https://honda-tech.com/zero...age=1
Located in N. FL buyer responsible for shipping charges. 3% for paypal use.
If interested IM/PM or post and I will get back to you. I have a number of references available here, on Club SI, and through Heatware. Feel free to ask about me here or anywhere else. I appreciate it, thanks.
Modified by INVALID at 10:02 PM 11/21/2006
Modified by INVALID at 3:07 PM 11/27/2006
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post