Hey guys,
Figure its time to clean out the basement. I have a bunch of parts to get rid of.
I can also email you pictures at your request if you're really dying to see these parts.

I charge actual shipping.

Stock parts

All of these parts are off a 97 prelude type SH. Most parts have about 80k
miles on them.

O2 sensor with 5k miles. This has the stock connector attached, and should
be plug and play - <FONT COLOR="Red">50</FONT>

Stock alternator. Complete with bracket if you need it. - <FONT COLOR="Red">55</FONT>






Stock power steering pump. No leaks, no grinding noises, complete with
bracket if you need it. - <FONT COLOR="Red">35 - SOLD</FONT>

Stock intake manifold, complete with runners. Throttle body sold
separately. IAC assembly sold separately. - <FONT COLOR="Red">40</FONT>

Stock prelude SH injectors and fuel rail. - <FONT COLOR="Red">85</FONT>

Stock complete throttle body - <FONT COLOR="Red">45</FONT>

Stock complete IAC assembly - <FONT COLOR="Red">25</FONT>

Stock distributor. Cap and rotor was replaced 15k miles ago. - <FONT COLOR="Red">55</FONT>

Stock SH header and heatshield. - <FONT COLOR="Red">30</FONT>

ATTS Tranny. Probably needs a new clutch. Starter sold separately. - <FONT COLOR="Red">450</FONT>

SH block that needs to be sleeved. Good for a project motor if you don't
want any down time. - <FONT COLOR="Red">250</FONT>

Starter for manual transmission, I don't know if it is different from the
auto one. Also works with Accords - <FONT COLOR="Red">50</FONT>








Type SH Bare head. Head only comes with Cams (SH cams, slight more agressive than the base, they have different part numbers. no gears), retainers, and thermo sensors. Assume you will have to buy all of the other parts. Head has 67k miles on it, valve guides are still good. Good candidate for a rebuild. <FONT COLOR="Red">200</FONT>










Aftermarket parts.

Arias stock compression pistons with 10k miles. - <FONT COLOR="Red">200</FONT> (edited price, I realize I severely undervalued these, lol)

Eagle H beam rods. - <FONT COLOR="Red">100</FONT>

Complete JRSC SH kit (works with base as well) with approx 25k miles and
upgrade pulley are my other thread - <FONT COLOR="Red">1300</FONT>
(See: http://www.preludeonline.com/s...14568)

VAFC first generation. Light scratches from wear and tare. - <FONT COLOR="Red">95</FONT>

MSD 6a, same internals and function as the SCI box. Comes with an accel
superstack coil. Its on eBay, but will end it if someone here wants it. -
<FONT COLOR="Red">90 - SOLD</FONT>

DC ceramic coated header, fits SH only. - <FONT COLOR="Red">150</FONT> (relized I overpriced this at 190)

Autometer boost gauge, phantom series (white face, black letters, not
indiglow). 2 1/16" diameter (or whatever that standard size is). Comes
with the connection kit that would cost you extra. - <FONT COLOR="Red">45</FONT>

STR Cam seal. Replace that crappy rubber one with something that wont leak! - <FONT COLOR="Red">25</FONT>



If you need any parts, email me. There is a good chance I will have them.

I am not parting out any interior parts. These are all leftovers from my
type S swap. If you need things like water hoses or little drips and
drabs, email me, and I will see what I can do.

If for whatever reason you believe I am completely off with my prices, let me know, I'm a reasonable person, and I am looking to get things out of my basement, I take constructive criticism very well, and would actually encourage it.

Best means of contact:
Email: leonardtlwong@yahoo.com (I prefer this over replying to the thread)
IM: FGAHDEEEW



Modified by lenn at 10:48 PM 11/8/2006

 

UP, H22 HEAD ADDED

 

UP, AFC available

 

AFC SOLD!
JRSC PENDING SALE!

Prices and items updated!

 

i would be willing to take your SH stock exhaust manifold, but i dont know how different we are talking about compared to a base model.

 

The SH B pipe is longer than the Base model's. If you have the Base B pipe, it will work with the SH A pipe.

 

do you have the stock exhaust???