ok first... why cant i find any front upper strut bars that fit an 03 civic ex coupe? its all 01-02. that or it says WILL NOT WORK WITH AFTERMARKET INTAKE.

second... i have about 500 dollars saved up to do the rear brake disc conversion.. the guys at my local shop said that they would install them for me but i have to get the parts. i didnt want to make them write out a whole list of the EXACT parts i need kuzz they were busy that day. anywho. will someone please tell me EVERY part i will NEED to do this swap. so i can go to a local honda junk yard with the list and have someone there help me get the stuff.

when i do the rear disc conversion will the lug pattern change? the ep3's are 4x100 right?

o and i just ordered my ATE brake rotors and hawk ceramic pads for the front. i guess the ATE rotors just improved the slots so they make the pads last longer than OEM they did the tests to prove it. 's up for that! ill let u know how they work.
thanks in advance. o and REDem if u read this.. your myspace is tight. my gf loves that song. she wont stop playing it thanks ;P

 

A Neuspeed front upper bar will fit the 01-05's and it WILL clear any aftermarket intake...

Brake swap: Rear spindles, rear trailing arms, brake lines, emergency brake cables, rear rotors, calipers, pads.

The 02, (and 03 I think) EP3 Si's have the 4x100 pattern. The 04-05's have a 5x114.3.

Thanks for the comments on the myspace page too... It took me a while to get it like I wanted it.

 

^yes, 02-03

 

k thanks.

 

02-03 si are 4 lug. There's a diy on the conversion on 7thgencivic.com. New to h-t so don't know if there's one here.

 

call Majestic Honda they will sell all that you need for rear break convertion for less than $300

 

Less than 300 bucks? I am calling bullshit, because each of the spindles and calipers by themselves are 150 a piece. 150x4. That is 600 bucks right there.

 

Bullshit verified, All the parts needed retail well over 300 dollars. Unless he's got a mad tyt3 JDM h00kup, yo.

 

well he is sponsored...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 01HonderCivic &raquo;</TD></TR><TR><TD CLASS="quote">Bullshit verified, All the parts needed retail well over 300 dollars. Unless he's got a mad tyt3 JDM h00kup, yo.</TD></TR></TABLE>



There isnt any way, unless he got them used from somebody who hated their rear brakes.... But there is no way you are getting lines, cables, rotors calipers and all for 300 BRAND NEW... no way in hell.

And usually nobody will be sponsored by a parts shop at a dealership... I have never heard of it.

He may be able to get sponsored from an aftermarket parts supplier/store like the one I work at, but 300 bucks BRAND new/OEM parts seems a little off the money, pun intended.

 

the parts are used from wreched acuras ( correction SI) when available


Modified by supermex at 5:15 PM 11/2/2006

 

So that means they'd be 5 lug, which would be useless for this dude....

It'd be much easier to just go to a junkyard, that way you can at least visually inspect the car they came off of.

 

the parts are used from RSX-s (correction SI)when available
go here to get detaiils from ppl that actualy do work on their cars and know what they talking about
http://www.7thgencivic.com/for...12186


Modified by supermex at 5:17 PM 11/2/2006

 

First off, you said you can buy brand new OEM parts from http://www.hondaautomotiveparts.com from an 02-03 EP3 for 300 bucks to do the swap.

Then you said that THEY use Acura RSX parts (5 lugs BTW), then change it to Acura parts.... WHICH ARE STILL 5 LUGS... And http://www.hondaautomotiveparts.com is a HONDA dealership, not Acura...

Then you finally make yourself look like an *** by saying WE don't know what we are talking about... Some nerve.... So GTFO and come back when you don't have your head stuck in the turbo of your $30,000 300 hp Civic.

 

A little sore?
With conects i can get ether 5 blugs acura or 4 lugs from the Si from about the $300 price not new used.
majestic honda gives me cost prices for all the other parts i may need new
Sponsored!
Whatever the guy wants.
Have him contact me I'll hook him up.
Quit your bitching and let the guy deside this isn't about you




Modified by supermex at 5:19 PM 11/2/2006

 

EL disc for canadians will also work since you live in Va it would be easier to find
again go here http://www.7thgencivic.com/for...12186 for full info with detailed pictures from ppl that had actualy done it.
e-mail me if you have any questions

 

dang i didnt mean to start a fight... lol i was hoping to spend around 700 ...

 

You didn't do anything this dude is just an ungry guy cause he can't pay for his car and I spend too much in mine, for some reason he hates that cause he keeps bringing it up.
Funny not even my wife gives me that much of a hassle
I got you message see reply


Modified by supermex at 5:36 AM 11/3/2006

 

$700 will get you far.

check ephatch.com, sometimes they sell their setup because they go 5lug. expect to spend around $3-400

 

btw, NOW would be a good time to go 5lug, if thats what you wanted. if you look well enough, you can get the entire 5lug assembly for a good 5-600 shipped.

 

EP3/DC5 strut bars will fit our cars, a lot of people have proven it already

 

kk ill start looking around and let u guys know what i find.

 

quick question... do i need to get more than one brake line and e brake cable?

 

yes, there's two rear wheels...

1x ebrake
2x lines

 

Click the following there is fellow selling a full convertion in Ontario
I also posted WTB on the forum
ls your best bet buying in canada as shipping may be expensive form the US plus the dollar to canadian money is not as good.
http://www.7thgencivic.com/for...rakes