It's fabbing time! Need your help... EF Hatch Roll-bar pics?
I am getting ready to start fabbing up a rollbar along with a built-in harness bar for my EF hatch. I need lots of pictures of mounting plates & points, weld locations, bends, joints, etc. Measurements or suggestions would be helpful as well. I know this may belong in A/C but I thought i could get some help from my fellow EF'ers who have done this.
-
Tippyman
-
Tippyman
Bump, i am also interested in this. Any designs that you can keep your interior in would be great also!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civicgeek133 »</TD></TR><TR><TD CLASS="quote">Bump, i am also interested in this. Any designs that you can keep your interior in would be great also!</TD></TR></TABLE>
Psshh... fu<U></U>ck that. Lol. But yes, I found some pix, hold on.
Psshh... fu<U></U>ck that. Lol. But yes, I found some pix, hold on.
Trending Topics
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by crawfo661 »</TD></TR><TR><TD CLASS="quote">insurance companys and emmisions locations will throw a fit guys, good luck, plus roll bars add too much weight
</TD></TR></TABLE>
Emissions? This is VA man... no E-test.
They may add like 120-150 lbs, but when coupled with a harness, i'll take the increased safety over a tenth of a second any day.
</TD></TR></TABLE>Emissions? This is VA man... no E-test.
They may add like 120-150 lbs, but when coupled with a harness, i'll take the increased safety over a tenth of a second any day.
http://www.dtr-fab.com/product_chassiswork.html
I had my roll cage done by dtr
...sorry I don't have pics but his site shows pics of his work.
I had my roll cage done by dtr
...sorry I don't have pics but his site shows pics of his work.
Have you put your cage in yet? I would suggest you attach the rear legs to the shock towers in the rear and eliminate additional strut tower bar. It will make the car a lot stiffer. The safety that a cage adds over the weight....I'll take it anyday of the week for a track car.
Thread
Thread Starter
Forum
Replies
Last Post
soodominican
Honda / Acura
17
Aug 16, 2008 01:51 AM
Tippyman
Welding / Fabrication
7
Oct 24, 2006 09:54 AM









