post pics and how to polish alumium ex: heads, trannys, blocks ect....
Thread Starter
Honda-Tech Member
Joined: Feb 2003
Posts: 3,645
Likes: 0
From: Savannah, GA, United States
post pics and how to polish alumium ex: heads, trannys, blocks ect....
i wanna know how to polish up the alumium on my gsr motor? should i lightly sand blast or just sand w/ 1000 grit and then rubbing compound? any pics and directions are welcome! also how long it took 
THANKS 
THANKS
Honda-Tech Member
Joined: Mar 2002
Posts: 7,506
Likes: 0
From: ATL to SAV to ORL, USA
Re: post pics and how to polish alumium ex: heads, trannys, blocks ect.... (jdmjeff)
https://honda-tech.com/zerothread?id=1563439
Check that link out. Good results, but a lot of damn elbow grease used
Check that link out. Good results, but a lot of damn elbow grease used
Thread Starter
Honda-Tech Member
Joined: Feb 2003
Posts: 3,645
Likes: 0
From: Savannah, GA, United States
Re: post pics and how to polish alumium ex: heads, trannys, blocks ect.... (Hybrid93Hatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hybrid93Hatch »</TD></TR><TR><TD CLASS="quote">https://honda-tech.com/zerothread?id=1563439
Check that link out. Good results, but a lot of damn elbow grease used </TD></TR></TABLE>
hhuumm kool. isnt that stainless? wonder how alumium would do. prob a lil easier seeing its softer.
Check that link out. Good results, but a lot of damn elbow grease used
</TD></TR></TABLE>hhuumm kool. isnt that stainless? wonder how alumium would do. prob a lil easier seeing its softer.
Thread
Thread Starter
Forum
Replies
Last Post
