91 Honda Civic Hatchback, 1.5L

I took the radius rods out of my 91 LX Sedan and am going to put one in the drivers side of my hatch. I need to know how the part with the one bolt on the end goes into the front cross member in back of the radiator. I know there were two rubber pieces that were on the radius rod.

I'm speculating that one rubber bushing goes on each side of the mount on the front cross member, but don't remember when I took them out.

Any help would be appreciated.

Thanks

 

Yes, You slide one bushing on then through the frame, then the other bushing and the washer, and then the nut.