when i highsided at the track i cracked my muffler


it didnt look fixable so i cut it off since it was cracked almost 1/2 the way, i also took out the packing

no my problem is how will i get it rewrapped? its a wolf exhaust and theres no rivets in the exhaust


the red piece slides off and is held on by 2 bolts circled in white which is welded in place.

this is how it looks now

how or where can i get it rewrapped?

 

i doubt its salvagable since there are no rivets to hold on the body part

 

You could have put a metal sleeve and some Jb weld (or other hi temp sealer/adhesive) around the crack.....but you already cut it off.

 

if it's a 2", i could sell you my nasty, rashy kerker for cheap

 

buy a FMF repack kit, and use hose clamp on the end (mabye nice satin finish or chrome one?) should work perfectly. hopefully you understand what im talking about, if not ill try to make a picture for ya.

 

thats not the problem, i can repack it and the endcaps on there hold it fine, its the sleeve thats cracked badly