- 1st gen b16a
Info:
I've had this engine since 01 and it has been trouble free...
Its only seen the track 2 times (maybe 8 passes total) and maybe a couple of street races back in the day... It has never been abused...

to be complete it will need:
-IM
-TB
-Fuel rail
-Exhaust manifold
-dizzy (I may have one im not sure if its in working order)
-valve cover studs


INCLUDES:
99/00 spec cams
99/00 stock valve train
arp head studs
OBD0 injectors

newer parts
oem water pump
new cam seals
newer timing belt
new oem head gasket

the bad;
its starting to smoke a little compresion is still good all the way across...but it is starting to smoke under decel...it still pulled nice and hard the last day I drove it

one of the studs on the exhaust manifold needs to be retapped

probally needs a minor/basic rebuild I.E. rings, valve job, gasket set

$500 OBO (I stress obo)... WILL DELIVER TO ONTARIO AREA FOR A FEW MORE $



pic with cams out


15X7 4X100 BBS RS mesh
I'd say a 7 out of 10
alot of the ones you see forsale are the ones that came factory on the Jettas...I believe these are the aftermarket ones... see pics for reference.
Im in the middle of restoring these wheels they will be tip top when someone pics them up... I'll paint the centers whatever color you choose
also I am fairly sure you will need to run extended studs for these...
MESH HAVE BEEN SOLD TO VEGABOX

this is the original finish some asshat painted the wheel silver



most recent pics during resto...
ready for paint...and about 1/2 way done with polishing...it will look like a mirror



pics of the other 3 BBS like I said they were spray painted silver when I got them... they will not look like this when you buy them...im in the process of restoring...



pic wont fully load for some reason...I assure you im not hiding anything!




pic of jetta wheel for comparo http://www.we-todd-did-racing....5NTQx

-EXEDY RACING STAGE 1 ORGANIC CLUTCH KIT
ACURA INTEGRA
1990 - 1991 / 1.8L / 4 cyl (THIS WORKS WITH MOST CABLE B SERIES)

SOLD
also have the same model Oem honda clutch...higher miles but works great
SOLD


CRX Exhaust
2.5" crush bent piping cat back
to highflow muffler with DA TIPS very quiet...even with a small res.

SALE PENDING




Im selling this for my G/F all of it is brand new never used except for the CD player...it has been in her car since Dec.


Pioneer DEH-6700MP


stats:
http://www.crutchfield.com/S-F...700MP

Basically brand new 100% complete...box everything...was used for less then 4 months and...this one plays the little graphic pictures that everyone was so impressed with 2-3 years ago...IE the Dolphins, indy car, etc etc...

they are going for $150+S/H on ebay missing parts
mine is $160 obo shipped and complete
$150 picked up

Audiobahn AUDA2002T
200W BRIDGED RMS POWER
2 CHANNEL AMPLIFIER



stats:
Amplifier Type: 2-channel
RMS Power @ 4 Ohms: 50W x 2
THD at 4-Ohm RMS Power: 0.02%
Bridged RMS Power @ 4 Ohms: 200W x 1
Preamp Outputs
Built-In Crossovers: HP/LP
Bass Boost: 0-18 dB
Frequency Response: 10-40,000 Hz
Signal to Noise Ratio: > 100 dB

once again brand new never used...I did start to mount it in her car and had it half hooked up...it did get power but I never used it...just made sure it turned on...and before I finished the install she decided to sell her car... so it is brand new...but out of box.

there going for about $100 shipped on ebay
I paid $175 for it

$80 obo shipped
$75 picked up


Boston Acoustic (rally) RC520 5 1/4 two way componet speakers

look real similar to these...same series diff size


email me for stats

brand new in box never used, I had the exact same set in another one my cars...and honestly one of the best sounding speakers you can buy without paying over $500...they sound as good as the Boston Pro series (unless the car is really set-up, then the PROs shine)

Used ones go for $150+s/h

BRAND NEW IN THE BOX
$200 OBO shipped
$175 picked up





Modified by DOHC_C-REX at 7:32 PM 10/10/2006


Modified by DOHC_C-REX at 10:42 AM 10/21/2006


Modified by DOHC_C-REX at 3:13 PM 10/22/2006


Modified by DOHC_C-REX at 4:23 PM 10/23/2006


Modified by DOHC_C-REX at 3:47 PM 10/24/2006

 

up up up

 

free bump, might pick up that clutch

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Old_Honda &raquo;</TD></TR><TR><TD CLASS="quote">free bump, might pick up that clutch</TD></TR></TABLE>


do it. do it

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DOHC_C-REX &raquo;</TD></TR><TR><TD CLASS="quote">do it. do it </TD></TR></TABLE> Lol, I need to figure out what tranny I'm getting first .

 

get this and it will make your trans choice easy

 

getting some offers keep em coming

 

do you know the offset on those rims?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hazard_one &raquo;</TD></TR><TR><TD CLASS="quote">do you know the offset on those rims?</TD></TR></TABLE>

if you could tell me how to figure it out i would...its not marked taht I know of

 

ereht pu

 

:subscribes: (for clutch)

payday's next week

bump for you

 

free

 

up please

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by whoa its len 2 &raquo;</TD></TR><TR><TD CLASS="quote">:subscribes: (for clutch)

payday's next week

bump for you </TD></TR></TABLE>


better hurry...several interested....

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VtecDa6xsi &raquo;</TD></TR><TR><TD CLASS="quote">free </TD></TR></TABLE>

wow a free one thanks

 

pmed u

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DOHC_C-REX &raquo;</TD></TR><TR><TD CLASS="quote">get this and it will make your trans choice easy </TD></TR></TABLE> Ended up getting a 92-93 tranny, but have a free bump anyways

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HFpower &raquo;</TD></TR><TR><TD CLASS="quote">pmed u </TD></TR></TABLE>

pm'd back...


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Old_Honda &raquo;</TD></TR><TR><TD CLASS="quote"> Ended up getting a 92-93 tranny, but have a free bump anyways </TD></TR></TABLE>


oh well...thanks for the bump

 

bump

 

Interested in the exaust.
going to the meet on the 21st?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EF JUNKIE &raquo;</TD></TR><TR><TD CLASS="quote">Interested in the exaust.
going to the meet on the 21st?</TD></TR></TABLE>


yes...and eibach...but if you wanted to see it...car is not running

 

sell sell sell

 

i want to pick up that stereo, hopefully you have it by monday...or ill see if i can borrow some $$$. By the way, im the one that picked up those crx doors from you

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civicdust &raquo;</TD></TR><TR><TD CLASS="quote">i want to pick up that stereo, hopefully you have it by monday...or ill see if i can borrow some $$$. By the way, im the one that picked up those crx doors from you </TD></TR></TABLE>

cool did the doors work out? if you will be at the eibach meet in corona on saturday I can bring it with me

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DOHC_C-REX &raquo;</TD></TR><TR><TD CLASS="quote">


yes...and eibach...but if you wanted to see it...car is not running</TD></TR></TABLE>

im not going to eibach and my car has no exaust s dont want to drive to far. ill let you know if you still have it by the 21st.

 

bump get this stuff out of here