P13 chip
Thread Starter
Joined: Oct 2006
Posts: 5
Likes: 0
From: Menomonee Falls, WI, USA
P13 chip
A buddy of mine gave me a mugen p13 chip (nice guy) My question is would I be able to put this chip in any other ecu, like a p75??? I do not know a lot about ecu chipping. If this would be possible, since the P75 ecu is non-vtec, would the chip engage it??? I figure that you Prelude guys would know. Thanks
Honda-Tech Member
Joined: Apr 2005
Posts: 1,455
Likes: 0
From: In My Garage, IL
Re: P13 chip (VTECPRIDE)
No I do not think it would work and besides if it did it would run way too rich because it's mapped for a 2.2L. Just sell it back on Ebay and get the right chip for your ecu but be careful there are ALOT of "bad" chips out there...
Honda-Tech Member
Joined: Aug 2005
Posts: 2,500
Likes: 1
From: Nor Cal, HillSide
Re: P13 chip (thegeorge613)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by thegeorge613 »</TD></TR><TR><TD CLASS="quote">General rule: NEVER trust any chips out there unless you personally know what exact changes have been made. Even then, be careful.</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 96vtecI4 »</TD></TR><TR><TD CLASS="quote">It's probly one of those ebay "mugen" chips, don't put that anywhere near your car.</TD></TR></TABLE>
Last skunk p13 program i saw was running 16.1 @ WOT
Ehhh
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 96vtecI4 »</TD></TR><TR><TD CLASS="quote">It's probly one of those ebay "mugen" chips, don't put that anywhere near your car.</TD></TR></TABLE>
Last skunk p13 program i saw was running 16.1 @ WOT
Ehhh
Honda-Tech Member
Joined: Aug 2005
Posts: 2,500
Likes: 1
From: Nor Cal, HillSide
Re: P13 chip (VTECPRIDE)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VTECPRIDE »</TD></TR><TR><TD CLASS="quote">A buddy of mine gave me a mugen p13 chip (nice guy) My question is would I be able to put this chip in any other ecu, like a p75??? I do not know a lot about ecu chipping. If this would be possible, since the P75 ecu is non-vtec, would the chip engage it??? I figure that you Prelude guys would know. Thanks</TD></TR></TABLE>
the p75 will not hit vtec with that chip. vtec is a hardware mod.
if the p75 was converted with vtec, you can, but dont.
the p75 will not hit vtec with that chip. vtec is a hardware mod.
if the p75 was converted with vtec, you can, but dont.
Thread
Thread Starter
Forum
Replies
Last Post
