PHX AZ OVER $6,000 IN PARTS FOR TURBO AND N/A FOR SALE!!!!!
Thread Starter
Junior Member
Joined: Nov 2005
Posts: 517
Likes: 0
From: 714 CA
PHX AZ OVER $6,000 IN PARTS FOR TURBO AND N/A FOR SALE!!!!!
I am selling my project 300HP D-series motor setup. I have paid well over 6,ooo grand so I am pretty firm on the prices but the more you buy the more I let the price drop. MORE THAN 90% is BRAND NEW and PLEASE SERIOUS BUYERS ONLY!
-D16Z6 Head, Ported and Polished by JG engineering with FULL crowler Valvetrain $525
-D16Z6 Bottom end, mirco crank new seals and ACL bearings and has PM6 Pistons 10.0.1 compression needs new rings I can install them for free. Compression was 190 now 155. Appox. 6,000 miles $350
-Clutchmaster stage 1 or 2 clutch SOHC I forgot which one haha grabs hard though $75
-9lb Flywheel $75
-Skunk2 Intake manifold with Port-matched to head by JG engeering $175
-B16A throttle body $40
-Injen cold air intake EG chassis $50
-Airmass header 2 peice SOHC $50
-Skunk2 CamGear gunmetal SOHC $90
-AEM fuel rail Silver SOHC $90
-Walbro 255 fuel pump $85
-Greddy tumer timer $80
-D16Z6 Tranny NO scratches $150
-Neptune standlone ECU - Light street tune for SEMI built MINI-ME. Has shift light at 7,800 two-step anywhere after 3,500 and I can have it re-mapped for any B series or H series for 20 bucks. $350
-Garrett GT28R Dual Ball bearing turbo from FULL_RACE $700
-SOHC tubular manifold WELDED BY BEN AT TOKYO SPEED PROS $225
-Charging piping for any appilcations for EK OR EG BY BEN since I have not had it fab for my car yet. $200
-Downpipe 2.5 for any b-series or D-series also BY BEN at TOKYO no yet fab for my car $200
-Intercooler 8X2.5X22 core $200
-ARP SOHC D16Z6 HEAD STUDS
-ARP D16Z6 rod bolts $35
-SRP 9.5:1 forged stock bore $300
-Magnaflow catco 2.25 with Magna flow 3in muffler with 2.25 piping $250
-DC sport short shifter $50
-Greddy EGT gauge,Boost Gauge,Oil Temp gauge - WHITE FACED $280
*more than 90% of this is still BRAND NEW! Please SERIOUS BUYERS
-D16Z6 Head, Ported and Polished by JG engineering with FULL crowler Valvetrain $525
-D16Z6 Bottom end, mirco crank new seals and ACL bearings and has PM6 Pistons 10.0.1 compression needs new rings I can install them for free. Compression was 190 now 155. Appox. 6,000 miles $350
-Clutchmaster stage 1 or 2 clutch SOHC I forgot which one haha grabs hard though $75
-9lb Flywheel $75
-Skunk2 Intake manifold with Port-matched to head by JG engeering $175
-B16A throttle body $40
-Injen cold air intake EG chassis $50
-Airmass header 2 peice SOHC $50
-Skunk2 CamGear gunmetal SOHC $90
-AEM fuel rail Silver SOHC $90
-Walbro 255 fuel pump $85
-Greddy tumer timer $80
-D16Z6 Tranny NO scratches $150
-Neptune standlone ECU - Light street tune for SEMI built MINI-ME. Has shift light at 7,800 two-step anywhere after 3,500 and I can have it re-mapped for any B series or H series for 20 bucks. $350
-Garrett GT28R Dual Ball bearing turbo from FULL_RACE $700
-SOHC tubular manifold WELDED BY BEN AT TOKYO SPEED PROS $225
-Charging piping for any appilcations for EK OR EG BY BEN since I have not had it fab for my car yet. $200
-Downpipe 2.5 for any b-series or D-series also BY BEN at TOKYO no yet fab for my car $200
-Intercooler 8X2.5X22 core $200
-ARP SOHC D16Z6 HEAD STUDS
-ARP D16Z6 rod bolts $35
-SRP 9.5:1 forged stock bore $300
-Magnaflow catco 2.25 with Magna flow 3in muffler with 2.25 piping $250
-DC sport short shifter $50
-Greddy EGT gauge,Boost Gauge,Oil Temp gauge - WHITE FACED $280
*more than 90% of this is still BRAND NEW! Please SERIOUS BUYERS
Thread
Thread Starter
Forum
Replies
Last Post
Tong.Y
All Motor / Naturally Aspirated
8
Oct 20, 2015 06:53 PM
speedooo
Northeast (Sales)
1
Aug 19, 2008 07:47 AM